Gigaset E36 User Manual page 6

You can also attach a cord for carrying the
handset in your hand or wearing it around
your neck.
Opening the battery cover
¤
If fitted, remove the belt clip.
¤
Reach into the housing cavity and pull
the battery cover upwards.
Connection socket for headset
You will find suitable headsets on the
Internet at www.plantronics.com.
Registering
You have to register your Gigaset E36 on a
base station before you can use it. It can
be registered on up to four base stations.
The registration process depends on the
particular base station.
Automatically registering the Gigaset E36
on the Gigaset E360/365
Requirement: the handset must not
already be registered on any base station.
Registering the handset on the Gigaset
E360/365 base station occurs automati-
cally.
¤
Place the handset in the charging cra-
dle of the base station with its display
facing forward.
You will hear a confirmation tone.
Automatic registration can take up to
5 minutes. While registration is in
progress the screen displays
The handset is assigned the lowest unas-
signed internal number (1–4). If several
handsets are registered on the base, the
internal number is shown in the display
after registration, for example 2. This
means that the handset has been assigned
the internal number 2.
Notes:
– Automatic registration is only possible if
the base station on which you wish to reg-
ister the handset is not being used to make
a call.
– A key press cancels automatic registration.
– If four handsets are already registered on a
Gigaset E360/365 base station there are
two options:
– The handset with the internal number 4
is in idle status: the handset you wish to
register is assigned the number 4. The
handset that was previously number 4 is
de-registered.
– The handset with the internal number 4
is being used: the handset you wish to
register cannot be registered.
– If automatic registration does not work, the
handset will have to be registered manu-
ally.
Manually registering the Gigaset E36
on the Gigaset E360/365
You must activate manual registration of
the handset on both the handset and the
base station.
After it has registered, the handset returns
to idle status. If several handsets are regis-
tered on the base, the internal number is
shown in the display after registration, for
example 2.
The registration process is cancelled after
60 seconds. If the handset has not regis-
tered within this time, repeat the process.
First steps
.
Registering
5