Overview Gigaset DA610 Display and keys £ 10 Hands-free key 11 Keys for setting the volume of the handset, speaker and ring tone £ Display ( page 4) 12 Microphone for hands-free use Control key ( page 5) Speed dial key Set key ¤...
Connecting the telephone ¤ Connect the telephone connector (1) to the main telephone socket. Use the tele- phone cable supplied. You may need a phone adapter depending on your country. This is provided in most cases. Power is supplied over the telephone line. A mains adapters is not necessary.
( page 9). u If you give your Gigaset DA610 to someone else, make sure you also Symbols provide information on the status of your telephone. give them the operating manual. Your Gigaset DA610 has a perma-...
Control key Telephoning You activate the functions and navigate the menus using the control key. The functions offered depend on the operating situation. In addition to the handset, you can also call using the speaker (hands- free function). In the following instructions, the symbol also always In standby: stands for...
Dialling from the call list Dialling pauses The call list contains the numbers of the last 50 incoming calls. One or more dialling pauses can be entered using (not at 1st digit). £ Requirement: Telephone number display is possible for incoming calls Pauses are transferred to the memory and are necessary for certain £...
Select the entry and open the context menu with Select EDIT ENTRY and confirm with Your Gigaset DA610 contains a phonebook in which you can save up to Change the number and confirm with 50 entries, each with a maximum of 32 digits for numbers and 14 char- Change the name and confirm with £...
Using the call list (CLIP) Using speed dialling numbers £ Incoming calls are saved if the number is transmitted ( page 11). Up to You can save 10 numbers for speed dial on the number keys (each with 50 calls are saved. If the number is the same, only the last incoming call max.
Setting the date and time Microphone, receiver and melody off. The telephone is completely muted. You can adjust the current date manually and change the format of the £ display. The time is updated by incoming calls with telephone number Microphone off, receiver on, melody off.
K 5 * Changing the VIP ringer volume Emergency calls There are two emergency numbers stored in the telephone by default Activate setting mode for the VIP ringer volume. If you lift (110, 112). You can store an additional emergency number with up to 32 the handset, you will hear the VIP ringer at the currently digits.
Network services Changing the dialling mode/flash time The telephone supports the following dialling modes: u Tone dialling u Pulse dialling Public telephone systemsoffer you – in some cases only on request – a range of helpful, additional services (e. g. call forwarding, callback when Depending on your PABX, you may need to change your phone's dialling busy, withheld number, etc.).
Other settings Standard characters £ In addition to the options described in section Adjusting the tele- The following characters can be entered using the keypad: phone ( page 8), you can perform further settings in setting mode (e.g. reset the factory settings). These are summarised in the following <...
Disposal Appendix All electrical and electronic equipment must be disposed of separately from general household waste using the sites designated by local Care authorities. If a product displays this symbol of a crossed-out rubbish bin, Wipe the unit with a damp cloth or an antistatic cloth. Do not use the product is subject to European Directive 2002/96/EC.