Connecting The Base Station To The Pabx; Dialling Modes And Flash Time; Save Access Code; Setting Pauses - Gigaset SL565 User Manual

Gigaset SL565 / GBR PTT / A31008-M1715-L111-2-7619 / pabx.fm / 24.10.08

Connecting the base station to the PABX

Connecting the base station
to the PABX
The following settings are only needed
when your PABX requires them. Please
refer to the user guide for your PABX.
You cannot send or receive SMS on PABXs
that do not support Calling Line Identifica-
tion.

Dialling modes and flash time

The current setting is indicated by
Changing the dialling mode
The following dialling modes can be
selected:
u
Tone dialling (DTMF),
u
Pulse dialling (DP).
¢ ¢
w Ð
Base
¢
Dialling Mode
s
Select dialling mode (
and press
a
Press and hold (idle status).
Setting the flash time
¢ ¢
w Ð
Base
¢
Recall
s
Select flash time (
and press
a
Press and hold (idle status).
54
‰
.
¢
Add. Features
‰
= on)
.
§OK§
¢
Add. Features
‰
= on)
.
§OK§

Save access code

Precondition: You may have to enter an
access code for external calls in your PABX,
e.g. "0".
¢ ¢ ¢
w Ð
Base
¢
Access Code
~
Enter or change access code,
max. 3 digits.
¤
Save changes: see page 61.
If an access code is stored:
u
The access code is prefixed automati-
cally when you select from the follo-
wing lists: numbers of the SMScentres,
calls list, answering machine list.
u
You must enter the access code when
dialling manually and when entering
directory, emergency/quick dial num-
bers and number for SMS centres
manually.
u
When sending an SMS, if you copy the
number of the recipient from the direc-
tory, you must delete the access code.
u
You can delete an existing access code
by pressing X.

Setting pauses

Changing pause after line seizure
You can change the length of pause that is
inserted between pressing the talk key
c and sending the number.
w
Open menu.
N 5 O 1 L
Press keys.
~
Enter digit for the pause
length (1 = 1 sec.; 2 = 3 secs.;
3 = 7 secs.) and press
Add. Features
.
§OK§