Gigaset SL565 User Manual page 47

Gigaset SL565 / GBR PTT / A31008-M1715-L111-2-7619 / registr_sett.fm / 24.10.08
Handset settings
Settings for individual functions
Set the volume and melody depending on
the type of signalling required. With exter-
nal calls, you can also set the phone so
that it announces the name of the caller
after the first ring. However, the relevant
voice pattern must have been previously
recorded (page 21).
¢ ¢
w Ð
Audio Settings
Ringer Settings
q
Select setting, e.g.
and press
r
Set volume (1–6).
s
Scroll to the next line.
r
Select melody.
s
Only in
Callssetting: scroll to the
Ext.
next line.
r
Activate or deactivate
Announce. Precondition: Cal-
ling Line Identification
(page 12).
Press the display key to save
§Save§
the setting.
In idle status, you can also open the menu
by pressing t briefly.
Ringer Settings
Settings for all functions to ring the
same
¢ ¢
w Ð
Audio Settings
Ringer Settings
¤
Set volume and ringtone (see "Settings
for individual functions").
Press the display key to con-
§Save§
firm the prompt.
a
Press and hold (idle status).
46
¢
Ext. Calls
.
§OK§
¢
¢
All
Activating/deactivating the ringtone
You can deactivate the ringtone on your
handset before you answer a call or when
the handset is in idle status; the ringtone
can be deactivated permanently or just for
the current call. The ringtone cannot be
re-activated while an external call is in
progress.
Deactivating the ringtone permanently
*
Press the star key and hold
until you can no longer hear
the ringtone.
The Ú icon appears in the display.
Re-activating the ringtone
*
Press and hold the star key.
Deactivating the ringtone for the
current call
Press the display key.
§Silence§
Activating/deactivating the alert tone
In place of a ringtone you can activate an
alert tone. When you get a call, you will
hear a short tone ("Beep") instead of the
ringtone.
*
Press and hold the star key
and within 3 seconds:
Press the display key. A call is
§Beep§§
now signalled by one brief
alert tone. You will now see
º in the display.
Vibration alarm
Incoming calls and other messages will be
identified by vibration.
¢ ¢
w Ð
Audio Settings
Select and press
Silent Alert
‰
( = on).
§OK§