Using Bluetooth Devices - Gigaset SL565 User Manual

Gigaset SL565 / GBR PTT / A31008-M1715-L111-2-7619 / registr_sett.fm / 24.10.08

Using Bluetooth devices

Your Gigaset SL56 handset can communi-
cate wirelessly via Bluetooth™ with other
devices using this technology.
Before you can use your Bluetooth
devices, you must first activate Bluetooth
and then register the devices to the hand-
set. You can register 1 Bluetooth headset
to the handset.
You will find a description of how to oper-
ate your Bluetooth devices in the user
guides for these devices.
Please note:
If the handset is in Bluetooth mode, any con-
nection via the data cable (page 61) that is
already connected will be interrupted. Blue-
tooth must be deactivated in order for you to
be able to use a connected data cable.
Activating Bluetooth mode
¢ ¢
w ý
Bluetooth
In idle status, the ò symbol on the hand-
set shows that Bluetooth mode is acti-
vated:
Ð ò V
INT 1
Registering Bluetooth devices
The distance between the handset in Blue-
tooth mode and the activated Bluetooth
device (headset or data device) should be
no more than 10 m.
Please note:
If you register a headset, any headset that
is already registered will be overwritten.
¢ ¢
w ý
Bluetooth
Headset / Search Data Device
The search can take up to 30 seconds.
Once the device has been found, its name
will be shown on the display.
Press the display key.
§Options
¢
Activation
¢
Search
Trust Device
Select and press
~
Enter the PIN for the Bluetooth
device you want to register
and press
§OK§
The device is saved in the list of known
devices.
Cancelling/repeating current search
To cancel search:
Press the display key.
Cancel
Repeat search if necessary:
Select and press
§Options
Repeat Search
Select and press
Editing the list of known (trusted)
devices
Open list
¢ ¢
w ý
Bluetooth
A corresponding symbol appears next to
each device name in the list displayed:
Icon Meaning
ô
Bluetooth headset
õ
Bluetooth data device
Viewing entries
¢
s (select entry)
Open list
Press the display key.
§Options
View Entry Select and press
Device name and address are
displayed.
Back with
§OK§
Changing the name of a Bluetooth device
¢
s (select entry)
Open list
Press the display key.
§Options
Select and press
Rename
~
Change name.
Press the display key
Save
a
Back: Press and hold key.
Handset settings
.
§OK§
.
.
§OK§
.
§OK§
¢
Known Devices
.
§OK§
.
.
§OK§
51