System Settings; Changing The Names For Internal Users; Setting Up/Deleting An Isdn Phone Number (Msn) - Gigaset CX150 isdn Instructions Manual

System settings

The abbreviations in brackets after the titles indicate the ISDN service concerned. Some
services may only be used if they have been authorised by the network provider (there
may be an extra charge).

Changing the names for internal users

When the phone is supplied, all internal numbers are allocated the names Int.11, Int.12
etc., according to how many there are. You can change these entries individually to suit
your requirements.
MENU
s
Base Settings
s
Settings
~
OK
s
Setup user
s
Setup device
s
Int.11
MENU
s
Name
~
MENU
Save entry

Setting up/deleting an ISDN phone number (MSN)

Your ISDN connection offers you two telephone lines (B channels) that you can use at
the same time. You can establish up to ten separate phone numbers (MSN) on your base
station.
Setting up an ISDN phone number (MSN) / changing the name
If you have not yet stored all your phone numbers, you may do so now. All phone
numbers that are stored retrospectively are automatically assigned to all
registered handsets.
Open the menu.
Select the menu item and confirm.
OK
Select the menu item and confirm.
OK
Enter system PIN if required (page 69).
Select the menu item and confirm.
OK
Select the menu item and confirm.
OK
Select internal number, e.g. Int.11.
Open the submenu.
Select the menu item and confirm.
OK
Change the name and open the menu.
Confirm. The name is now shown in the internal list,
OK
including when an internal call is made from this
internal number.
System settings
71