Setting Pauses; Switching Temporarily To; Tone Dialling (Dtmf) - Gigaset C460 User Manual

Setting pauses

Changing pause after line seizure
You can set the length of the pause inserted
between pressing the talk key
the phone number.
4 I O 1 O
§Menu§
~
Enter digit for the pause length
(1 = 1 sec.; 2 = 3 sec.; 3 = 7 sec.)
and press
a
Press and hold (idle status).
Changing the pause after the recall key
You can change the length of the pause if your
PABX requires this (refer to the user guide for
your PABX).
4 I O 1 4
§Menu§
~
Enter a digit for the length of the
pause (1 = 800 ms; 2 = 1600 ms;
3 = 3200 ms) and press
a
Press and hold (idle status).

Switching temporarily to

tone dialling (DTMF)

If your PABX still operates with dial pulsing (DP),
but you need tone dialling (DTMF) for a connec-
tion (e.g. to listen to the network mailbox) you
must switch to tone dialling for the call.
Requirement: You are conducting a call or
have already dialled an external number.
+
Press the star key. Tone dialling is
now activated for this call only.
c
and sending
.
§OK§
.
§OK§
Operating the base station on the PABX
25