Table of Contents
Advertisement
GB
St
Function
Volume
ze
16
About RDS DISPLAY function
About "PS NAME" MODE
Open/Close
PTY
RDS
Display
Press the RDS Display button to select the PS NAME.
/Tuning Mode
Prog./Set
3
Repeat
P.Sound
Preset EQ
About 'RT' MODE
Press the RDS Display button to select the RT MODE.
About CT(Clock Time)
To select the CT time, set the RDS Display button to CT MODE.
Displays the name of broadcasting station.
"PS NAME" appears on the display.
If the PS information is being received, the PS name (BBC, AFO, NDR,
etc.) is shown on the display.
If the PS information isn't received, the original FM frequency is shown.
Even though no RDS Display button is pressed, the reception of PS
information ensures the PS name is displayed.
Displays the character transmitted from the broadcasting station.
"RT" appears on the display.
If the RT information is being received, the received information is
shown on the display.
If the RT information isn't received, the "NO RT" is shown.
On the display.
Sets the time of the RDS clock.
The CT information will take up to 2 minutes to be decoded therefore
the clock isn't displayed immediately.
If there is no available CT information, "NO CT" is displayed.
The CT RDS clock does not update the system clock.
Hide quick links:
Advertisement
Table of Contents
