Harbor freight tools hand finishing orbital sander assembly and operating instructions 40070 (13 pages)
Summary of Contents for Drill Master 67046
Page 1
Harbor Freight Tools. Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual product may differ slightly from the product described herein. Tools required for assembly and service may not be included.
SKU 67046 For technical questions, please call 1-800-444-3353. notice is used to address practices not related to personal injury. caution, without...
Page 3
Use of these devices can reduce dust-related hazards. SKU 67046 For technical questions, please call 1-800-444-3353. only use safety equipment that has been approved by an appro- priate standards agency. Unap- proved safety equipment may not provide adequate protection.
For technical questions, please call 1-800-444-3353. sander safety Warnings Maintain labels and nameplates on the tool. These carry important safety information. If unreadable or miss- ing, contact Harbor Freight Tools for a replacement. Avoid unintentional starting. Prepare to begin work before turning on the tool.
(California Health & Safety Code § 25249.5, et seq.) SKU 67046 For technical questions, please call 1-800-444-3353. The warnings, precautions, and in- structions discussed in this instruction manual cannot cover all possible con- ditions and situations that may occur.
Extension cords must not be used with this item’s charger. symbology Double Insulated Canadian Standards Association Underwriters Laboratories, Inc. Volts Alternating Current Amperes No Load Revolutions per Minute n 0 xxxx/min. (RPM) SKU 67046 For technical questions, please call 1-800-444-3353. Page 6...
For additional information regarding the parts listed in the following pages, refer to the Assembly Diagram near the end of this manual. SKU 67046 For technical questions, please call 1-800-444-3353. Functions Lock Button Power Switch (13)
To lock the Power Switch on for con- tinuous use: Hold down the Power Switch (13), then depress the Lock Button. SKU 67046 For technical questions, please call 1-800-444-3353. Release the Power Switch, then release the Lock Button. Turn off by depressing then releasing the Power Switch.
Overheating Forcing tool to work too hard. Follow all safety precautions whenever diagnosing or servicing the tool. disconnect power supply before service. SKU 67046 For technical questions, please call 1-800-444-3353. troubleshooting Charge the Battery. Have technician service tool.
If product has no serial number, record month and year of purchase instead. note: Some parts are listed and shown for illustration purposes only, and are not avail- able individually as replacement parts. SKU 67046 For technical questions, please call 1-800-444-3353. part description Tapping Screw ST2.9 x 14...
INSTALLATIoN of REPLACEMENT PARTS THERETo. limited 90 daY WarrantY Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this prod- uct is free from defects in materials and workmanship for the period of 90 days from the date of purchase.