Table of Contents
Advertisement
Quick Links
Owner's Manual & Safety Instructions
Save This Manual
operating, inspection, maintenance and cleaning procedures� Write the product's serial number in the
back of the manual near the assembly diagram (or month and year of purchase if product has no number)�
Keep this manual and the receipt in a safe and dry place for future reference�
email our technical support at: productsupport@harborfreight.com
reV 14h
When unpacking, make sure that the product is intact
and undamaged� If any parts are missing or broken,
please call 1-888-866-5797 as soon as possible�
©
Copyright
2012 by Harbor Freight Tools
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools�
Diagrams within this manual may not be drawn proportionally� Due to continuing
improvements, actual product may differ slightly from the product described herein�
Tools required for assembly and service may not be included�
Keep this manual for the safety warnings and precautions, assembly,
Bonnet sold separately.
Visit our website at: http://www.harborfreight.com
®
� All rights reserved�
read this material before using this product.
Failure to do so can result in serious injury.
SaVe tHiS ManuaL.
Advertisement
Table of Contents
Related Manuals for Drill Master 69487
Summary of Contents for Drill Master 69487
- Page 1 Owner’s Manual & Safety Instructions Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures� Write the product’s serial number in the back of the manual near the assembly diagram (or month and year of purchase if product has no number)� Keep this manual and the receipt in a safe and dry place for future reference�...
- Page 2 2� Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes. Page 2 For technical questions, please call 1-888-866-5797. Item 69487...
-
Page 3: Electrical Safety
Power tools are dangerous in the hands of untrained users. Item 69487 For technical questions, please call 1-888-866-5797. Page 3... - Page 4 Damaged accessories will 16� Avoid unintentional starting� normally break apart during this test time� Prepare to begin work before turning on the tool� Page 4 For technical questions, please call 1-888-866-5797. Item 69487...
- Page 5 Do not allow any loose portion of the polishing bonnet or its attachment strings to spin freely. tuck away or trim any loose attachment strings. Loose and spinning attachment strings can entangle your fingers or snag on the workpiece. Item 69487 For technical questions, please call 1-888-866-5797. Page 5...
-
Page 6: Vibration Safety
OSHA requirements and complies with the applicable standards of Underwriters Laboratories, Inc�, the Canadian Standard Association, and the National Electrical Code� Outlets for 2-prong plug Page 6 For technical questions, please call 1-888-866-5797. Item 69487... -
Page 7: Extension Cords
Do not cover ventilation ducts� Keep flammable objects away� WARNING marking concerning Amperes Risk of Electric Shock� Properly connect power cord n 0 xxxx/min� to appropriate outlet� No Load Revolutions per Minute (RPM) Item 69487 For technical questions, please call 1-888-866-5797. Page 7... -
Page 8: Specifications
The power cord must but not limited to, ANSI-approved eye and hearing reach the work area with enough extra length protection, as well as heavy-duty work gloves� to allow free movement while working� Page 8 For technical questions, please call 1-888-866-5797. Item 69487... -
Page 9: Operation
Apply the wax to all flat surfaces with broad, 18� Clean, then store the tool indoors sweeping strokes in a crisscross pattern� out of children’s reach� Apply the wax evenly over the surface of the vehicle� Item 69487 For technical questions, please call 1-888-866-5797. Page 9... -
Page 10: Maintenance
• any other condition that may affect its safe operation� 5� WarninG! if the supply cord of this power tool is damaged, it must be replaced only by a qualified service technician. Page 10 For technical questions, please call 1-888-866-5797. Item 69487... -
Page 11: Parts List And Diagram
Some parts are listed and shown for illustration purposes only, and are not available note: If product has no serial number, record individually as replacement parts� month and year of purchase instead� Item 69487 For technical questions, please call 1-888-866-5797. Page 11... -
Page 12: Warranty
Limited 90 Day Warranty Harbor Freight Tools Co� makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase�...