Advertisement
Owner's Manual & Safety Instructions
Save This Manual
operating, inspection, maintenance and cleaning procedures. Write the product's serial number in the
back of the manual near the assembly diagram (or month and year of purchase if product has no number).
Keep this manual and the receipt in a safe and dry place for future reference.
Email our technical support at: productsupport@harborfreight.com
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1-888-866-5797 as soon as possible.
©
Copyright
2019 by Harbor Freight Tools
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
Tools required for assembly and service may not be included.
Keep this manual for the safety warnings and precautions, assembly,
Visit our website at: http://www.harborfreight.com
®
. All rights reserved.
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
19b
Advertisement
Related Manuals for Drill Master 61311
Summary of Contents for Drill Master 61311
- Page 1 Owner’s Manual & Safety Instructions Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the back of the manual near the assembly diagram (or month and year of purchase if product has no number). Keep this manual and the receipt in a safe and dry place for future reference.
-
Page 2: Table Of Contents
Keep work area clean and well lit. the presence of flammable liquids, Cluttered or dark areas invite accidents. gases or dust. Power tools create sparks which may ignite the dust or fumes. Page 2 For technical questions, please call 1-888-866-5797. Item 61311... -
Page 3: Safety
– it prevents before turning the power tool on. A wrench sustained electrical shock. or a key left attached to a rotating part of the power tool may result in personal injury. Item 61311 For technical questions, please call 1-888-866-5797. Page 3... - Page 4 To reduce vibration, maintain the tool as of the tool in unexpected situations. explained in this manual. If any abnormal vibration occurs, stop use immediately. SaVE tHESE inStructiOnS. Page 4 For technical questions, please call 1-888-866-5797. Item 61311...
- Page 5 (See table a.) wire size required. (See table a.) Item 61311 For technical questions, please call 1-888-866-5797. Page 5...
- Page 6 Do not cover ventilation ducts. Keep flammable objects away. WARNING marking concerning No Load Revolutions n 0 xxxx/min. per Minute (RPM) Risk of Electric Shock. Properly connect power cord to appropriate outlet. Page 6 For technical questions, please call 1-888-866-5797. Item 61311...
-
Page 7: Specifications
3. The Dust Chute will only work if the sandpaper has holes that line up with the 6 dust collection holes in the Backing Pad. (There are 4 other holes in the Backing Pad for screws.) Backing clamp Item 61311 For technical questions, please call 1-888-866-5797. Page 7... -
Page 8: Operation
The work area must not allow access by children or pets to prevent distraction and injury. 5. There must not be objects, such as utility lines, nearby that will present a hazard while working. Page 8 For technical questions, please call 1-888-866-5797. Item 61311... - Page 9 6. To prevent accidents, turn off the tool and Use sandpaper with a lower grit number unplug it after use. Clean, then store the to remove material faster. tool indoors out of children’s reach. Item 61311 For technical questions, please call 1-888-866-5797. Page 9...
-
Page 10: Maintenance
Some parts are listed and shown for illustration purposes only, and are not available individually as replacement parts. Page 10 For technical questions, please call 1-888-866-5797. Item 61311... -
Page 11: Parts List And Diagram
Description Right Housing Backing Pad Left Housing Cord Sleeve Bearing Dust Port Stator Dust Chute Dust Connector Bearing 607 Switch Aluminum Fan Rotor Oscillating Bracket Power Cord (not shown) Item 61311 For technical questions, please call 1-888-866-5797. Page 11... -
Page 12: Warranty
Limited 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase. This warranty does not apply to damage due directly or indirectly, to misuse, abuse, negligence or accidents, repairs or alterations outside our facilities, criminal activity, improper installation, normal wear and tear, or to lack of maintenance.