Table of Contents
Advertisement
Filter in the water inlet hose
If no water or insufficient water is running
into the washing machine:
First, reduce the water pressure in the
inlet hose:
q Turn off the tap.
q Select any programme
(except Spin"/Drain").
q Press the start/stop" button and
watt for the Tap closed?" message.
q Switch off the washing machine.
q Remove the hose from the tap.
q Clean the filter with a small brush or
paint brush.
q Connect the hose.
q Turn on the tap.
q Check whether water is leaking out of
the end of the hose connected to the
tap.
If water is leaking, check that the filter
is correctly seated.
44
Descaling the washing ma
chine
Warning
Descaling agents contain acids which
may corrode the components of the was
hing machine and discolour the washing.
Provided the detergent dosage is correct,
you should not need to descale the was
hing machine.
If descaling is nevertheless required, plea
se follow the instructions supplied by the
manufacturer of the descaling agent.
Hide quick links:
Advertisement
Table of Contents
