CARGO COVER*
1.
Secure the hooks at the floor (A).
2.
Press together the spring-loaded rail and affix
it in the brackets at (B) on both sides.
3.
Affix the brackets at (C) in the same way.
4.
Secure the hooks at (D).
Undo the attachment points (D) and if necessary
(C) on both sides during loading.
Undo (D), (C), (B) and (A), and roll up the cargo
cover when not in use.
CARGO COVER – HARD*
Attachment
1. Pull all four lock buttons backwards to their
end positions.
2. Carefully lift in the cargo cover, position the
front section on the two supports behind (A)
on both sides.
HOLDER FOR FLOOR HATCH
Floor hatch in open position without/with
cargo cover.
LOWERING THE BACKREST
Pull up the lock catch and move the backrest
forward.
3. Align one rear lock at (B) and press the lock
button forwards.
4. Lock the three remaining ones in the same
way.
Removal
Pull all four lock buttons backwards to their end
positions – first (A), then (B) and lift out.