Polaroid HD-READY LCD TV User Manual page 25

9.6-Connecting an external device via HDMI connection
Side view of the TV
HDMI: When a connection is made via HDMI socket, select the HDMI
input you connected through from the Source menu and press the OK
button to be able to display these pictures. Your TV will switch to the
selected source.
Connect to the HDMI input at the back of your TV by using the connector located on your PC or your
digital video-transmission device with a suitable cable (not supplied with the TV).
Note: To be able to watch an image in the HDMI mode, your computer must be equipped with a HDMI
graphic card.
You may display the resolution information by pressing the INFO button.
9.6.1-HDCP
Your TV supports HDCP feature. To use this feature, you must set up a connection to your TV set's HDMI
video port and select HDMI by pressing the AV key on your remote control.
NOTE:In HDMI mode; some resolutions are supported when a DVI to HDMI converter cable from a PC is
used. Only 16:9, 4:3, 14:9 (some definitions) are supported as picture format.
High Definition - HD-READY
Your television can receive high-definition signals (HDTV). You can connect the input
sources (HDTV set-top box or HDTV DVD player) to the (HDMI) socket (digital HDTV signal).
This ensures that you can view digital HDTV programs, even if they are copy-protected
(HDCP High-Definition Copy Protection).
9.7-PC connection
Rear view of the TV
9.7.1-PC Connection:
Connect the D-Sub15 connector to the PC-IN socket at the back of your television by using an
appropriate cable (not supplied with your television). Again, by using an appropriate cable, connect the
audio output of your PC to the PC AUDIO-IN at the back of your television to listen to sounds from your
PC and you can adjust the volume level of your source by using VOL+/VOL- buttons.
Picture connection
Audio connection
23 I
GB
DVD
SATALLITE RECEIVER
GAME CONSOLE