Fine Tuning - Polaroid HD-READY LCD TV User Manual

To stop the process at any given time, please
press the MENU button. The Program Table,
which will allow you to sort the channels as you
wish, will be displayed after the automatic search
is complete.
6.2.2-Manual tuning of channels and
storing in the memory
6.2.2.1-If you already know the
channel number
Press the MENU button. Move to the SETUP
menu by pressing the Down movement button in
Main Menu and confirm your selection with OK
button. The Setup menu is displayed.
SETUP
SYSTEM
CHANNEL
FINE TUNE
SEARCH
PROGRAM NO
STORE
AUTOPROGRAM
CHANGE
Select the system in which you would like
to make the search from the SYSTEM
tab. Move into CHANNEL tab by
pressing the down movement button.
Press OK on your remote control to
select "S" for cable channels and "C" for
channels received via the antenna. Move
onto the PROGRAM NO tab and using
the number buttons enter the channel
number in which you would like to have
the channel stored. If the broadcast
viewed on the screen is of your desired
quality, first move onto the STORE tab with the
down movement button to store in the memory
the selection you have made and store the channel
by pressing the Left or Right movement buttons.
The prompt STORED will be displayed briefly. The
channel will be stored according to the program
number of your choice. You can tune and store in
memory other channels the same way. In the event
that you wish to exit the channel settings menu for
any reason, simply press the EXIT button.
BG
S06
0
◄ ►
P13
MENU
BACK
11 I
6.2.2.2-If you do not know the
channel number
Press the MENU button. Move to the
SETUP menu by pressing the down
movement button in Main Menu and
confirm your selection with OK button.
The Setup menu is displayed. Select the
system in which you would like to make
the search from the SYSTEM tab. Move
into CHANNEL tab by pressing the down
movement button. Press OK on your
remote control to select "S" for cable
channels and "C" for channels received
via the antenna. Select SEARCH tab
using the up/down movement buttons,
and scan the channels in ascending
order with Right movement button and
in descending order with Left movement
button. If the channel that is found is of your liking,
select the STORE tab. Then store it in the memory
by pressing the Right or Left movement buttons.
Repeat the same procedure for other channels by
selecting the program number of your choice from
the PROGRAM NO tab. If the channel you found
is not of the desired quality and requires Fine
Tuning or if you would like to rename the channel,
refer to the relevant sections.

6.2.3-Fine Tuning

If the channel you found is not of the
desired quality and requires Fine Tuning,
then select the FINE TUNE tab by
pressing the Down movement button in
the SETUP menu. Using the Left/Right
movement buttons on your remote
control, adjust the broadcast displayed
on the screen to your desired quality.
Under normal circumstances, you will
not require to use the Fine Tune function.
The AFC values of your television will automatically
adjust and lock themselves to the channel.
However, you might need it in case the television
transmitters do not operate according to the
standards. To store in the memory, the settings
you have made, select the STORE tab and press
the Right or Left movement button.
GB