Page 1
42" 1080P FULL HD LCD TV Your TV may look different from the one pictured. Questions? If you still have questions, call Need some help? Or visit our help line found on the www.polaroid.com/support. insert with this icon: This manual should help you...
TABLE OF CONTENT DIGITAL TELEVISION TRANSITION NOTICE ........... 1 FOR YOUR SAFETY ....................2 PRECAUTIONS AND REMINDERS ..............3 IMPORTANT SAFETY INSTRUCTIONS ............. 4 PACKAGE CONTENTS ................... 5 PREPARATION ......................6 ATTACHING THE BASE ........................6 PREPARING YOUR LCD HDTV FOR WALL MOUNTING ............6 CONNECTION GUIDE ...................
DIGITAL TELEVISION TRANSITION NOTICE This device contains a digital television tuner, so it should receive digital over-the-air TV programming, with a suitable antenna, after the end of analog TV broadcasting in the United States on February 17, 2009. Some older television receivers, if they rely on a TV antenna, will need a TV Converter to receive over-the-air digital programming, but should continue to work as before for other purposes (e.g., for watching low-power TV stations still broadcasting in analog, watching pre-recorded movies, or playing video games).
FOR YOUR SAFETY Before operating the TV please read this manual thoroughly. This manual should be retained for future reference. FCC Class B Radio Frequency Interference Statement WARNING: (FOR FCC CERTIFIED MODELS) NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
PRECAUTIONS AND REMINDERS Place unit on an even Unplug immediately if Do not cover or block surface. foreign materials are put any vents or openings. inside TV or if the TV falls. Inadequate ventilation may shorten the life of the display unit and cause overheating.
IMPORTANT SAFETY INSTRUCTIONS Read before operating equipment 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with a dry cloth. 7. Do not block any of the ventilation openings. Install in accordance with the manufacturers instructions.
18. Tilt/Stability – All televisions must comply with recommended international global safety standards for tilt and stability properties of its cabinets design. ● Do not compromise these design standards by applying excessive pull force to the front, or top, of the cabinet, which could ultimately overturn the product. ●...
PREPARATION IMPORTANT: Do not apply pressure to the screen display area which may compromise the integrity of the display. The manufacturer’s warranty does not cover user abuse or improper installations. ATTACHING THE BASE IMPORTANT: The Base of the HDTV must be assembled prior to usage. 1.
Page 9
1. Install the base stand; place the TV on a 3. Remote control: solid surface. Remove the cover of the battery compartment. Insert the 2 batteries supplied (Type AAA 1.5V). Ensure that the TV is placed in a well ventilated area. Do not cover the ventilation openings on the back cover.
CONNECTION GUIDE 1. HDMI – Connect the primary source for digital video such as a DVD multimedia player or set top box through this all digital connector. 2. PC IN – Connect the video and audio cables from a computer here. 3.
OPERATING INSTRUCTIONS TO USE THE TV'S PANEL BUTTON CONTROLS SOURCE VOL + VOL +: Press to increase the volume level. VOL - VOL - : Press to decrease the volume level. CH ▲ CH +: Press to select the next higher channel CH ▼...
TO USE THE REMOTE CONTROL MTS/SAP POWER Press to activate various audio Press to power ON/OFF modes, such as: Stereo, SAP or (standby) the TV. Mono tone, and languages of Press to turn TV ON after the DTV. power on status and the LED has changed to the red color WIDE and stopped fl ashing.)Note:...
TO USE THE MENUS them in a channel table. During the channel scan, the OSD will display the number of 1. Press the MENU button to display the channels that have been found. main menu 4. Add on Ch search: Adds new channels 2.
3. Sharpness: Video sharpness adjustment, speaker. The digital audio output signals the tuning range is -50 ~ 50. and headphone output signals will not be turned off even though the TV speaker is 4. Color: Video color chroma adjustment, the off .
Page 15
3. Advanced Video Menu: Provides Noise is only available in TV, Composite, and Reduction, Color Temperature, 3D Y/C, and S-Video source modes. (The default factory Dynamic Contrast options for enhancing password is: 0 0 0 0.) video quality. Enter Password Noise Reduction gives four NR eff ects: Low, Mid, High, and Off .
Page 16
Digital Closed Caption Custom Style Small Size Default Font White Text Color Text Opacity Solid Background Color Background Opacity Solid Edge Effect Depressed Edge Color CLOSED CAPTION SAMPLE 9. VGA Set: This option is only available in VGA Enter Exit To Move To Select To Exit...
Y : 1V(p-p), 75 ohm, including sync. PRODUCT SPECIFICATION Pr/Cr: ±0.35V(p-p), 75 ohm Pb/Cb: ±0.35V(p-p), 75 ohm NOTE AUDIO: 500mv(rms) * This model complies with the Supported resolutions: 1080P, 1080i, 720p, specifi cations listed below. 480p, 480i * Designs and specifi cations are subject to HDMI Terminals: change without notice.
BEFORE CALLING SERVICE Please try these simple checks before calling service. These tips may save you time and money because charges for receiver installation and adjustments of customer controls are not covered under your warranty. Symptoms Items to Check and Actions to follow “Ghost ”...
GLOSSARY HDTV HDTV displays are technically defi ned as being capable of displaying a minimum of 720p or 1080i active scan lines. HDMI Inputs High-Defi nition Multimedia Interface Audio / Video Inputs Located on the rear of the receiver, these connectors (RCA phono type plug) are used for the input of audio and video signals.
Page 21
Questions? Need some help? This manual should help you understand your new product. If you have questions, call our customer service number found on the insert with this icon: 20080902 20080902 Or visit www.polaroid.com. 20080815...