Connecting A Video Recorder Device And A Digital Satellite Receiver - Polaroid LCD TV User Manual

9.2.3-PC Setting
Enter into the SETUP menu from the Main
Menu by pressing the MENU button in the
PC mode. In order to make the necessary
settings in this menu, you can use the P+/P-
/ -VOL/VOL+ movement buttons on your
remote control. You can make the following
settings for your monitor in this menu.
9.2.4-HORIZONTAL POS: Horizontal
position setting
9.2.5-VERTICAL POS: Vertical position
setting
9.2.6-CLOCK
This is the pixel clock frequency. User can
narrow down or enlarge the display by
selecting a desired value.
9.3-Connecting a Video recorder device and a digital satellite
receiver
ANT IN
ANT OUT
Scart 1 TV IN/OUT
DIGITAL SATALLITE RECEIVER
ANT IN
Scart 2 VCR (AUX)
9.2.7-PHASE
Using the -VOL/VOL+ movement buttons,
you can ensure that the colors and shapes
are exactly consolidated on the PC image.
9.2.8-AUTOCONFIGURATION
The most suitable geometric settings
in accordance with the entry mode
are configured by this function.
For this operation, select the
AUTOCONFIGURATION tab and press
OK button. You can adjust the volume level
of the source you have connected to the
Audio-In input at the back of your TV by
using the -VOL/VOL+ buttons.
Note: In the Monitor mode, you can make
the Brightness, Contrast, Sharpness, Red,
Green and Blue Settings from the PICTURE
menu.
ANT OUT
SCART Socket
VIDEO RECORDER
15 I
k
ANT IN
REAR OF THE TELEVISION