Optional Extension Brackets - MATSONIC MS9307C Series User Manual

Optional Extension Brackets

For this mainboard, you can also obtain a USB module extension
bracket for more USB ports. Install them by following the steps
below.
Note: All the ribbon cables used on the extension brackets have a
red stripe on the Pin-1 side of the cable.
Extended USB Module
This module bracket has four USB ports for more USB devices
(USB port 3-6).
1. Locate the USB1/USB2 header on the mainboard.
2. Plug the bracket cable onto the USB1/USB2 header.
3. In the system chassis, remove a slot cover from one of the
expansion slots and install the extension bracket in the opening.
Use the screw that held the slot cover in place to secure the
extension bracket to the chassis.
2: Mainboard Installation
15