Martin MAC 300 User Manual page 14

M a n u a l c o n t r o l
The manual control menu (
• To reset the fixture, select
• To turn the lamp on or off, select
• To open, close, and strobe the shutter at 3 speeds, select
• To control the dimmer, select
• To move the color wheel to each position and scroll it at 3 speeds, select
• To control the CMY mix, select
• To insert the frost filter, select
• To control pan and tilt, select
A d j u s t m e n t c o n t r o l a n d c a l i b r a t i o n
The adjustment menu (
• Reset the fixture (
• Turn on and off the lamp (
• Disable pan/tilt feedback (
• Control effects in the head (
• Move the head to the home and extreme positions (
• Calibrate effects (
H e a d e f f e c t s a d j u s t m e n t
The head submenu (
performed by a qualified technician. It allows the technician to:
• Open, close, and strobe the dimmer/shutter
• Move the color wheel to the open, sensor, and full color positions
• Move the CMY wheels to the open, sensor, and full positions
• Insert and remove the frost filter
C a l i b r a t i o n
The calibration submenu (
substitute for mechanical adjustment. To reset all calibrations to their factory defaults, select
when SUR E
1. Select the effect to calibrate: pan (
( MA OF
2. Calibrate the effect using the arrow keys until it matches the other units. Offsets are adjustable
from 1 to 255.
3. Press [ Enter ] to save the calibration.
14
MA N
) permits limited operation from the control panel.
RST .
L O N
dI M .
C YAN
FR OS
.
PA N and
A dJ
) provides the following functions:
R ST
)
L ON , Lo FF
FEb A )
H EAd
)
CAL )
A dJ / HEAd ) provides manual control when making mechanical adjustments, which must be
A dJ / CA L ) allows you to adjust the effects for uniformity between fixtures: it is not a
is displayed, or press [MENU] to escape.
), or yellow ( YE OF ).
or LoF F .
SHU T
.
, MAG , and YE L .
TIL T .
)
PAT I )
P OF ), tilt ( T O F ), dimmer/shutter (
Fixture Settings
C OL .
d FOF
and press [Enter]
d OF ), cyan ( CY OF ), magenta