Installation
Statutory
requirements
Preparing to install
Fig. 1a
8
This installation must conform with the following:
Manufacturer's Installation instructions
Ø
Local Gas Fitting Regulations
Ø
Municipal Building Codes,
Ø
Refer to AS/NZS 5601.1 for Gas Installations.
Ø
S.A.A. Wiring Code
Ø
Local Electrical Regulations
Ø
Any other statutory regulations
Ø
Refer to AS/NZS 5601.1 for piping size details. These
built-in cooktops are intended to be inserted in a
benchtop cutout.
Do not stick the cooktop onto the worktop with silicone.
Only an officially authorised technician should connect
the appliance.
Before you begin, turn off the gas and electricity supply.
Installation dimensions are shown in Fig.1a/1b/1c.