Panasonic Diga DMR-EH770 Operating Instructions Manual page 69

Tabs
Sound Digital Audio Output
Change the settings when you have connected equipment through this unit's DIGITAL AUDIO OUT terminal (➡ 16).
(continued)
≥Press [OK] to show the following settings.
PCM Down Conversion
Select how to output audio with a sampling frequency of 96
kHz or 88.2 kHz.
≥Signals are converted to 48 kHz or 44.1 kHz despite the
settings across if the signals have a sampling frequency of
over 96 kHz or 88.2 kHz, or the disc has copy protection.
Dolby Digital
DTS
MPEG
Audio Mode for XP Recording
Choose the audio type when recording or copying with XP
mode.
Audio Mode for DV Input
You can select the kind of audio when recording from the unit's
DV input terminal (➡ 60).
Display Language
Choose the language for these menus and on-screen messages.
On-Screen Messages
Choose whether to show status messages automatically.
Grey Background
Select "Off" if you do not want to have the unit show the grey
background when tuner reception is weak.
FL Display
Changes the brightness of the unit's display.
This setting is fixed with "Automatic" if you set "Power Save"
(➡ 71) to "On".
Menus
Select how to output the signal.
Select "Bitstream" if the connected
equipment decodes the signal.
Select "PCM" if this unit decodes
the signal and outputs it as 2
channels.
[Note]
Not making the proper settings
may result in noise or some trouble
for digital recording.
Options (Underlined items are the factory presets.)
≥On: Signals are converted to 48 kHz or 44.1 kHz. (Choose
when the connected equipment cannot process signals
with a sampling frequency of 96 kHz or 88.2 kHz.)
≥Off: Signals are output as 96 kHz or 88.2 kHz. (Choose when
the connected equipment can process signals with a
sampling frequency of 96 kHz or 88.2 kHz.)
≥Bitstream:When connecting to equipment displaying the Dolby
Digital logo.
≥PCM: When connecting to equipment not displaying the Dolby
Digital logo.
≥Bitstream: When connecting to equipment displaying the DTS
logo.
≥PCM: When connecting to equipment not displaying the DTS
logo.
≥Bitstream: When connected to equipment with a built-in
MPEG decoder.
≥PCM: When connected to equipment without a built-in MPEG
decoder.
≥Dolby Digital (➡ 84)
≥LPCM (➡ 85)
–The picture quality of LPCM recordings may be lower than
that of normal XP mode recordings.
–The audio recording becomes Dolby Digital even if you
selected LPCM when using a recording mode other than XP.
–When recording a bilingual broadcast, select the type of
audio in advance from "Bilingual Audio Selection" (➡ 68).
≥Stereo 1: Records audio (L1, R1).
≥Stereo 2: Records added audio such as narration (L2, R2)
subsequent to original recording.
≥Mix:
Records both Stereo 1 and Stereo 2.
When recording bilingual broadcast, select the type of audio in
advance from "Bilingual Audio Selection" (➡ 68).
≥English ≥Deutsch
≥Español ≥Nederlands
≥Svenska: only appears when "Sverige", "Danmark", "Norge" or
"Suomi" is selected in the Country setting menu
(➡ 20).
≥Automatic
≥Off
≥On
≥Off
≥Bright ≥Dim
≥Automatic: The display turns dark during play and disappears
when the unit is turned off. It reappears momentarily
if a button is pressed. While using this mode, the
standby power consumption can be reduced.
≥Français ≥Italiano
(continued on the next page)
RQT9011
69