Connecting With 21-Pin Scart Cable - Panasonic DMR-ES30VEB Quick Start Manual

Connecting with 21-pin Scart cable

S
=Extra equipment for the connection shown:
RF cable (Aerial cable), 21-pin Scart cable
DVD Recorder
AC IN~
AC IN~
4
AV1 21-pin
Scart socket
AV2
S VIDEO
VIDEO
Y
P
L
B
AUDIO
OPTICAL
P
R
R
DVD OUT
AV2 (EXT)
AC mains lead
3
S
21-pin Scart cable
Necessary for TV with Q Link
TV
4
AC mains lead
Follow the steps below.
Disconnect the power of all units.
1
2
3
4
RF IN
Aerial input
RF IN
S
Aerial cable
RF OUT
AV1 (TV)
RF OUT
Aerial output
Aerial
input
Connect the Aerial to the RF IN (Aerial input) of the
DVD Recorder.
Connect the RF OUT (Aerial output) of the DVD Recorder
to the Aerial input of the television set.
Connect the AV1 socket (21-pin Scart socket) of the DVD Recorder
to the Scart input of the television set.
Plug the DVD Recorder and the television set into
the AC mains socket.
If your television set supports Q-Link,
follow the steps for Auto-Setup with Q-Link on page 4.
If your television set does not support Q-Link,
follow the steps for Auto-Setup without Q-Link on page 4.
If your television supports Q-Link or RGB, connect it to the
DVD Recorder with a fully wired 21-pin Scart cable.
Change the AV2 Input setting to match the output from a
satellite receiver after tuning is completed.
SETUP - Connections - [AV1 Output]
- 2 -
1
Aerial
RF cable /
2
RF cable /
Aerial cable