Table of Contents
Advertisement
TG7200-7220FX(e-e).book Page 43 Friday, June 29, 2007 10:24 AM
Answering system (KX-TG7220)
Problem
Cause & solution
The unit does not
L The answering system is turned off. Turn it on
record new messages.
L The recording time is set to "Greeting Only".
L If you subscribe to the voice mail service,
I cannot operate the
L The base unit or another handset is being used.
answering system with
the handset.
L A caller is leaving a message. Wait for the caller to
L The handset is too far from the base unit. Move
When I try to operate
L Another handset is being used. Wait for the other
the answering system
with the base unit, the
L A caller is leaving a message. Wait for the caller to
answer on indicator on
the base unit flashes
for a few seconds and
I cannot operate the
answering system.
I cannot operate the
L You are entering the wrong remote access code. If
answering system
remotely.
L Press each key firmly.
L The answering system is turned off. Turn it on
L You are using a rotary/pulse telephone. Try again
While recording a
L A call is being received. Answer the call and try
greeting message or
listening to messages,
the unit rings and
recording stops.
For DSL users
We recommend connecting a filter (contact your DSL service provider) to the
telephone line between the base unit and the telephone line jack.
(page 27).
Select "1 Minute" or "3 Minutes" (page 31).
messages are recorded by your service
provider/telephone company not your telephone.
Change the unit's "Number of Rings" setting or
consult your service provider/telephone company
(page 31).
Wait for the other user to finish.
finish.
closer.
user to finish.
finish.
you forget the remote access code, store a new
remote access code (page 29).
(page 30).
using a touch-tone phone.
again later.
Useful Information
43
Hide quick links:
Advertisement
Table of Contents
