To Cancel Recording When Recording Has Already Begun; To Release The Unit From Recording Standby; Relief Recording; Auto Renewal Recording - Panasonic Diga DMR-EX89 Operating Instructions Manual

4
Press [OK].
The timer programme is stored and the timer icon is
displayed.
Timer icon
"F" lights on the unit's display to indicate timer recording
standby has been activated.
TUE 14.10.09. 12:56:00
HDD
Drive
Stop Mode space
DVD
22:30 SP
HDD OK
ogramme
Repeat steps 2–4 to programme other recordings.
Press [Í] to turn the unit off.
To cancel recording when recording
has already begun
1
While the unit is on
Press [∫].
Stop Recording
Timer recording in progress.
Stop this timer recording ?
It will be cancelled if you stop.
Stop Recording Cancel
SELECT
RETURN
OK
2
Press [2, 1] to select "Stop
Recording" and press [OK].
If you stop a timer recording, it will be cancelled. However, if
you have set a weekly, daily or series timer recording, the
recording will start from the next time the timer recording is
set.
To release the unit from recording
standby
Even when the unit is turned off, you can display the timer recording
list by pressing [PROG/CHECK].
1
Press [PROG/CHECK].
2
Press [3, 4] to select the programme
and press the "Red" button.
≥The timer icon "F" ( 28) disappears from the timer
recording list.
≥You cannot cancel timer recording standby mode as long as
even one timer icon "F" (
recording list.
≥Press the "Red" button again to activate timer recording
standby.
No. Channel

01
ARD
Check to make sure "OK" is
displayed ( 28).
28) remains in the timer

Relief Recording

When the recording drive is "DVD" and there is not enough
remaining space, recording automatically switches to the "HDD". If
there is no disc in the tray or the disc cannot be recorded on or when
timer recording starts while copying, the recording drive will be
altered to the HDD.
≥The DIRECT NAVIGATOR shows which programmes were relief-
recorded (" " is displayed.) (
≥If the time remaining on the HDD is insufficient, as much of the
programme as possible will be recorded onto the HDD.

Auto Renewal Recording

[HDD]
If you record a programme onto HDD repeatedly everyday or every
week using timer recording, or if you record a programme of series
onto HDD repeatedly using Series timer recording, the unit will
record the new programme over the old one.
This function can be used only when weekly, daily or series
timer recording is selected.
1
Press [PROG/CHECK].
2
Press [3, 4] to select the programme
and press [OK].
3
Press [2, 1] to select "RENEW"
column.
4
Press [3, 4] to select "ON" and press
[OK].
Timer
Remain HDD 30:24 SP DVD
Recording
TUE 14.10.09. 12:53:00
HDD
Channel Date Start Stop Mode
DVD
1 ARD SUN 22:00 22:30 HDD SP
All Channels : ARD
Programme Name
Note
≥If a programme set for Auto Renewal Recording is protected or
while play back is taking place from the HDD, or while copying, the
programme will not be overwritten. Instead the programme set for
recording will be saved as a separate programme, and this
programme will be the one to be overwritten when the next Auto
Renewal Recording takes place.
≥Playlists made from programmes that were set for Auto Renewal
Recording are deleted along with auto renewal.
≥When there is not enough space on the HDD, the programme may
not be recorded completely.
33).
1:58 SP
RENEW
ON
RQT9414
27