Setting The Rear View Camera; Updating Bluetooth Connection Software; Displaying The Bluetooth - Pioneer AVH-P3200BT Operation Manual

Menu operations
4 Touch Clear.
After selecting a desired item, a confirmation
display appears. Touch OK to delete the mem-
ory.
# If you do not want to clear the selected mem-
ory, touch Cancel.
Updating Bluetooth connection
software
(AVH-P3200BT only)
This function is used to update this unit with
the latest software. For information on the soft-
ware and updating, refer to our website.
Important
Never turn the unit off and never disconnect the
phone while the software is being updated.
1 Display the system menu.
Refer to Introduction of menu operations on
page 46.
2 Touch Bluetooth Software Update.
3 Touch Start to display the data transfer
mode.
# Follow the on-screen instructions to finish up-
dating the software.

Displaying the Bluetooth

system version
(AVH-P3200BT only)
If this unit fails to operate properly, you may
need to consult your dealer for repair. In such
cases, you may be asked to specify the system
version. Perform the following procedure to
check the version on this unit.
1 Turn the unit off.
Refer to Basic Operations on page 10.
2 Display the system menu.
Refer to Introduction of menu operations on
page 46.
3 Touch Bluetooth Version Information to
display to the version of the Bluetooth
module of this unit.

Setting the rear view camera

(back up camera)
CAUTION
Pioneer recommends the use of a camera
which outputs mirror-reversed images.
Otherwise, the screen image will appear re-
versed.
This unit features a function that automatically
switches to the rear view camera video (V IN)
when a rear view camera is installed on your
car and the gear shift is moved to the RE-
VERSE (R) position.(For more details, con-
sult your dealer.)
! After you set up the rear view camera set-
ting, move the gear shift to REVERSE (R)
and confirm that the rear view camera
video is shown on the display.
! Change this setting if the display switches
to the rear view camera video by error while
you are driving forward.
! To stop watching the rear view camera
video and return to the source display,
press and hold MUTE.
! Touch the RearView source icon to display
the rear view camera image while driving.
Touch the source icon again to turn the
rear view camera off. For details, refer to Se-
lecting a source using the touch panel keys
on page 10.
1 Display the system menu.
Refer to Introduction of menu operations on
page 46.
2 Touch Camera Polarity on the system
menu to select the appropriate setting.
! Battery – When the polarity of the con-
nected lead is positive while the gear shift
is in REVERSE (R) position
Section
13
67
En