Setting The Automatic Open Function; Adjusting The Lcd Panel Angle; Adjusting The Lcd Panel Slide Position - Pioneer AVH-5300DVD Operation Manual

Section
11 Menu operations
2 Display the system menu.
Refer to Introduction of menu operations on
page 39.
3 Touch Bluetooth Version Information to
display to the version of the Bluetooth
module of this unit.
Setting the automatic open
function
To prevent the display from hitting the shift
lever of an automatic vehicle when it is in the
P (park) position, or when you do not wish the
display to open/close automatically, you can
set the automatic open function to manual
mode.
1 Display the system menu.
Refer to Introduction of menu operations on
page 39.
2 Touch Auto Flap to select whether to
open/close the display automatically or
manually.
Each time you touch Auto Flap the setting
switches between:
! On – The LCD panel will open or close auto-
matically when the ignition switch is turned
on or off.
! Off – You have to press OPEN/CLOSE to
open/close the LCD panel.
Adjusting the LCD panel slide
position
You can adjust the LCD panel slide position so
that the panel is set back or forward.
1 Display the system menu.
Refer to Introduction of menu operations on
page 39.
2 Touch Flap Set Back.
50
En
3 Touching the Flap Set Back keys allows
you to move the LCD panel back and forth.
The LCD panel slides to the back.
The LCD panel slides to the front.

Adjusting the LCD panel angle

Important
! If you can hear the LCD panel knocking
against your vehicle's console or dashboard,
touch and hold OPEN/CLOSE to temporarily
level the LCD panel.
! When adjusting the LCD panel angle, be sure
to touch and hold OPEN/CLOSE. Forcibly ad-
justing the LCD panel by hand may damage it.
1 Display the system menu.
Refer to Introduction of menu operations on
page 39.
2 Touch Display Tilt.
3 Touch the Display Tilt keys to adjust the
LCD panel to an easily viewable angle.