Stopping Playback And Switching Power Off - Pioneer DVD-V550 Operating Insructions

Stopping Playback and
Switching Power Off
– DVD/Super VCD/Video CD/CD
4
5
1
2
3
2
1
4
5
2
Resuming playback from where
1
you stopped
Resume paly is possible only in Normal mode.
With this player, it is possible to resume play of a DVD or
Video CD even when play has been stopped.
Press STOP 7 once to enable play to resume
from a point shortly before the DVD/Video CD was
stopped when PLAY 3 is pressed again.
• To begin disc playback from the beginning, press
STOP 7 twice to turn off resume playback, and then
start playback again.
• When STOP 7 is pressed, "RESUME" appears in the
display for as long as resume playback is possible.If
the function is canceled, "RESUME" disappears and
the disc format appears in the display.
Notes
• Resume play is only possible when the disc is loaded and
STOP 7 has not be pressed twice in succession ("RESUME"
appears in the display). If you want to continue viewing a DVD
at a later time or date, it is recommended to use the Last
Memory function described on page 49.
• Resume play is not possible in Karaoke mode.
• If the player is switched to Karaoke mode after resume play is
set in Normal mode, resume play is canceled.
• Resume play is cancelled if the PLAYBACK CONTROL is
turned ON/OFF while resume play is set.
• Resume play is not possible with Super VCDs and CDs.
• For some discs, playback may not start from the position at
which it was stopped.
Press STOP 7.
Playback stops.
Press OPEN/CLOSE 0.
The disc tray comes out.
Remove the disc.
Press on the remote control.
The disc tray goes back in.
[Models having a POWER switch on the main
unit]
Check that the "- - OFF - -" indication on the
display goes off, then press POWER on the
front panel.
–– DVD/Video CD
25