Resolution; Aspect; The Auto Power Down Menu; The Fl Demo Mode Menu - Pioneer VSX-S500-K Operating Instruction

06 The Home Menu
06

Resolution

Specifies the output resolution of the video signal (when
video input signals are output at the HDMI OUT terminal,
select this according to the resolution of your monitor and
the images you wish to watch).
1
Select 'Video Parameter' from the Home Menu.
2
Select 'Resolution' from the Video Parameter menu.
5b.Resolution
5.Video Parameter
a.Video Converter
b.Resolution
c.Aspect
Return
3
Select output resolution.
• AUTO – The resolution is selected automatically
according to the capacity of the TV (monitor) connected
by HDMI.
• PURE – The signals are output with the same resolution
as when input.
• 480p/720p/1080i/1080p – The signal is output with the
resolution specified here (480p means the resolution of
480p/576p).
4
When you're finished, press RETURN.
You return to the Video Parameter menu.
Note
• When set to a resolution with which the TV (monitor) is
not compatible, no picture is output. Also, in some cases
no picture will be output due to copyright protection
signals. In this case, change the setting.
40
En

Aspect

Specifies the aspect ratio when analog video input signals
are output at the HDMI OUT terminal. Make your desired
settings while checking each setting on your display (if the
image doesn't match your monitor type, cropping or black
bands appear).
1
Select 'Video Parameter' from the Home Menu.
2
Select 'Aspect' from the Video Parameter menu.
AUTO
Resolution 5.Video Parameter
a.Video Converter
b.Resolution
c.Aspect
Return
3
Select desired output aspect ratio.
• THROUGH – The input video signal is output unchanged.
• NORMAL – Black bands will appear either at top and
bottom or on both sides.
4
When you're finished, press RETURN.
You return to the Video Parameter menu.
Note
• If the image doesn't match your monitor type, adjust the
aspect ratio on the source component or on the monitor.
• ANALOG refers to the composite video input terminal.
Depending on the Input Assign menu setting, the input
will be allocated to either ANALOG AUX, DIGITAL AUX,
or CD.
5c.Aspect
NORMAL
BD/BDR
DVD/DVR [THROUGH]
GAME [THROUGH]
STB [NORMAL ]
TV/SAT [NORMAL ]
ANALOG [NORMAL ]
Return
Return

The Auto Power Down menu

Set to automatically turn off the receiver after a specified time
has passed (when the power has been on with no operation
for several hours).
• Default setting: 6H
1
Select 'Auto Power Down' from the Home Menu.
Home Menu
7.Auto Power Down
1 . Auto MCACC
2 . Manual SP Setup
3 . Pre Out Setting
4 . Input Assign
5.Video Parameter
6.HDMI Setup
7.Auto Power Down
8.FL Demo Mode
2
Specify the amount of time to allow before the power
is turned off (when there has been no operation).
• You can select 2, 4 or 6 hours, or OFF (if no automatic
shutoff is desired).
3
When you're finished, press RETURN.
You return to the Home Menu.

The FL Demo Mode menu

Set whether or not various demos are to be shown on the
front panel display.
1
Select 'FL Demo Mode' from the Home Menu.
Home Menu 8.FL Demo Mode
1 . Auto MCACC FL Demo
2 . Manual SP Setup
3 . Pre Out Setting
4 . Input Assign
5.Video Parameter
6.HDMI Setup
7.Auto Power Down
8.FL Demo Mode
2
Choose ON or OFF for the demo display.
3
When you're finished, press RETURN.
You return to the Home Menu.
6H
Return
ON
Return