Connecting Equipment To The Front Panel Inputs; Installing Your Speaker System - Pioneer VSX-C402 Operating Insructions

Connecting your equipment

Connecting equipment to the front panel inputs

The FRONT INPUT jacks include a standard (composite)
video jack (VIDEO), stereo analog audio inputs (AUDIO
L/R) and an optical digital audio input (DIGITAL). You can
use these connections for any kind of audio/video
component, but they are especially convenient for
portable equipment such as camcorders, video games
VSX-C402
STANDBY/ON
DIGITAL IN
PHONES
VIDEO IN/OUT

Installing your speaker system

To take full advantage of the receiver's surround sound
capabilities connect front, center and surround
speakers, as well as a subwoofer. Although this is ideal,
other configurations with fewer speakers—no subwoofer
or no center speaker, or even no surround speakers—will
VSX-C402
R
2
AV DIRECT DIGITAL DTS STEREO
FRONT INPUT
VIDEO L AUDIO R
COLOR BRIGHT
AUDIO IN/OUT
PHONES
DIGITAL OUT (OPTICAL)
Portable DVD player, etc.
ANTENNA
PREOUT
AM LOOP
SURROUND FM UNBAL 75Ω
SPEAKERS
DIGITAL IN
R R
L L STB DVR/TV
SUB
CENTER
FRONT SURROUND (DVD)
WOOFER
OUT OPT1
L C
and portable audio/video equipment.
• Remove the cover to access the front panel jacks.
(See diagram below)
• The illustration below shows example connections to
a portable DVD player.
2
PRO LOGICII ADVANCED PHONES SOUND MODE INPUT SELECTOR
Push where indicated then pull off from
the other side.
STANDBY/ON
FRONT INPUT
DIGITAL IN VIDEO
PHONES
MONITOR
ON/OFF HOLD
work. At the very least, front left and right speakers only
are necessary. Note that surround speakers should
always be connected as a pair; do not connect just one
surround speaker. All the speakers you use should have
a nominal impedance between 6–16Ω.
IN
OUT
CONTROL
VIDEO IN/OUT
AV CONNECTOR
PREOUT DVD IN
DVD
(STB)
OPT2 COAX
LINE LEVEL
RS LS
AUDIO/VIDEO MULTI-CHANNEL RECEIVER VSX-C402
MASTER
VOLUME
R
DOWN UP
AV DIRECT 2 DIGITAL DTS STEREO 2 PR
L AUDIO R
AC IN
DVR/TV IN/OUT
STB IN
SW
03
13
En