Panasonic KX-TG8011FX Operating Instructions Manual page 54

TG8011-8021FX(e-e).book Page 54 Wednesday, August 20, 2008 9:50 AM
Useful Information
Making/answering calls, intercom
Problem
w is flashing.
Noise is heard, sound cuts in
and out.
The handset does not ring.
The base unit does not ring.
I cannot make a call.
*1 KX-TG8021
54
Cause/solution
L The handset is not registered to the base unit.
Register it (page 30).
L The handset is too far from the base unit.
Move closer.
L The base unit's AC adaptor is not connected.
Check the connections.
L You are using the handset or base unit in an
area with high electrical interference. Re-
position the base unit and use the handset
away from sources of interference.
L You are using the handset or base unit in an
area with high electrical interference. Re-
position the base unit and use the handset
away from sources of interference.
L Move closer to the base unit.
L If you use a DSL/ADSL service, we
recommend connecting a DSL/ADSL filter
between the base unit and the telephone line
jack. Contact your DSL/ADSL provider for
details.
L The ringer volume is turned off. Adjust ringer
volume (page 24).
L Night mode is turned on. Turn it off
(page 28).
*1
L The ringer volume is turned off. Adjust ringer
volume (page 25).
L The dialling mode may be set incorrectly.
Change the setting (page 17).
L The handset is too far from the base unit.
Move closer and try again.
L Another unit is in use. Wait and try again later.
L Answering system is being used.
try again later.
L The key lock feature is turned on. Turn it off
(page 20).
*1
Wait and