Central Pneumatic 47407 Assembly And Operation Instructions Manual
  1. Manuals
  2. Brands
  3. Central Pneumatic Manuals
  4. Air Compressor
  5. CENTRAL PNEUMATIC 47407
  6. Assembly and operation instructions manual

Central Pneumatic 47407 Assembly And Operation Instructions Manual

2 gallon, 100 psi oilless air compressor
Hide thumbs

Advertisement

Table of Contents

2 Gallon, 100 PSI oIlleSS

aIr ComPreSSor

aSSembly and oPeratIon InStruCtIonS
Due to continuing improvements, actual product may differ slightly from the product described herein.
Visit our website at: http://www.harborfreight.com
to PreVent SerIouS Injury, read and underStand
all warnInGS and InStruCtIonS before uSe.
Copyright
2002 by Harbor Freight Tools
©
or any artwork contained herein may be reproduced in any shape or form without the
express written consent of Harbor Freight Tools.
for technical questions or replacement parts, please call 1-800-444-3353.
model
3491 Mission Oaks Blvd., Camarillo, CA 93011
revised Cover Page 02/04; 11/04; 02/05; 01/07
47407
. All rights reserved. No portion of this manual
®
®

Advertisement

Table of Contents
loading

Related Manuals for Central Pneumatic CENTRAL PNEUMATIC 47407

Summary of Contents for Central Pneumatic CENTRAL PNEUMATIC 47407

  • Page 1: Air Compressor

    Copyright 2002 by Harbor Freight Tools © or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools. for technical questions or replacement parts, please call 1-800-444-3353. model 47407 .

  • Page 2: Specifications

    Power Requirement Tank Capacity Pressure Switch Piston Diameter Air Outlet Pressure Tank Gauge Regulator Gauge Power Cord Air Hose Features Accessories Weight You will need the manual for the safety warnings and precautions, assembly instructions, operating and maintenance procedures, parts list and diagram. Keep your invoice with this manual.
  • Page 3 dress properly. Do not wear loose clothing or jewelry as they can be caught in moving parts. Protective, electrically non-conductive clothes and non-skid footwear are recommended when working. Wear restrictive hair covering to contain long hair. use eye and ear protection. Always wear ANSI approved impact safety goggles. Wear an ANSI approved dust mask or respirator when working around metal, wood, and chemical dusts and mists.
  • Page 4 When unpacking, check to make sure the following parts are included. If any parts are miss- ing or broken, please call Harbor Freight Tools at the number on the cover of this manual as soon as possible.

  • Page 5: Operation

    115V electrical source (± 10% maximum variation.) Push the On/Off Switch to the ON position. Allow the Tank to fill to 80 PSI before using. With the Air Compressor turned on, operation is automatic and under the control of the internal pressure switch. Internal Pressure Switch Caution: do not make changes to the internal pressure level switch;...

  • Page 6: Maintenance

    When all pressure is released, close the water spill valve again. Purge the Air Tank daily of all air and moisture to prevent corrosion. Store the Air Compressor in a clean and dry location. Check all air fittings for leaks before using.

  • Page 7: Parts List

    Part description Handle Shroud Switch Screw Nut, M3 Screw, M3x10 Air Pressure Switch Base Plate & Tank Drainage Valve Screw, M4 x 14 Washer, M4 Washer, Rubber Valve Body Connector I Spring Rubber Plug Outlet Connector Tube Assembly Nylon Clamp note: Some parts are listed and shown for illustration purposes only and are not available individually as replacement parts.

  • Page 8: Assembly Drawing

    Limited 1 Year warrantY Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability warranty standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of one year from the date of purchase.

This manual is also suitable for:

47407

Table of Contents