Central Pneumatic 67696 Owner's Manual & Safety Instructions

Central Pneumatic 67696 Owner's Manual & Safety Instructions

6 gallon oiless air compressor

Advertisement

Advertisement

Table of Contents
loading

Summary of Contents for Central Pneumatic 67696

  • Page 2: Table Of Contents

    If this compressor is altered in any way, existing warranties shall be voided. Harbor Freight Tools disclaims any liabilities whatsoever for any loss, personal injury, or damage.
  • Page 3: General Safety Rules

    GENERAL SAFETY RULES Additional safety protection will be required in some environments. For example, the working area WARNING: may include exposure to a noise level which can lead to Read and understand all instructions. Failure to hearing damage. The employer and user must ensure follow all instructions listed below may result in electric that any necessary hearing protection is provided shock, fire, and/or serious personal injury.
  • Page 4: General Safety Rules

    GENERAL SAFETY RULES Never point any tool toward yourself or others. Disconnect power supply, open drain valve to decompress tank and allow water to drain, and Keep the exterior of the air compressor dry, clean, allow air compressor to become cool to the touch and free from oil and grease.
  • Page 5: Specific Safety Rules

    SPECIFIC SAFETY RULES Know your power tool. Read operator’s manual Always follow all safety rules recommended by the carefully. Learn its applications and limitations, as well manufacturer of your tool, in addition to all safety as the specific potential hazards related to this tool. rules for the air compressor.
  • Page 6: Symbols

    150 PSI.
  • Page 8: Electrical

    Replace a damaged or worn cord immediately. Replace a damage or worn cord immediately.
  • Page 10: Features

    FEATURES PRODUCT SPECIFICATIONS Running Horsepower ..........1.5 HP Lubrication .............. Oil-Free Air Tank Capacity ............6 gal. Gauges ............1.5 in. diameter Air Pressure ............150 PSI max. Input........120 V, 60 Hz, AC only, 12 Amps Air Delivery ......... 2.5 SCFM @ 90 PSI Net Weight (compressor only) ........35.8 lbs.
  • Page 11: Assembly

    FEATURES KNOW YOUR AIR COMPRESSOR PRESSURE REGULATOR KNOB See Figure 2. Use the pressure regulator knob to adjust the amount of Before attempting to use this product, familiarize yourself air being delivered through the hose. with all operating features and safety rules. REGULATOR PRESSURE GAUGE BUILT-IN CORD WRAP The current line pressure is displayed on the regulator...
  • Page 12: Assembly

    ASSEMBLY PRESSURE BREAKING IN THE PUMP ON/OFF SAFETY REGULATOR See figure 3 - 4. SWITCH VALVE KNOB Check and tighten all bolts, fittings, etc. LOCKING Turn the pressure regulator knob fully clockwise to open the air flow. Turn the locking nut clockwise to lock. Place the switch in the OFF (O) position and plug in the power cord.
  • Page 13: Operation

    See Figure 3.
  • Page 14 See Figure 5. Fig. 5 Fig. 6 See Figure 6.
  • Page 15: Maintenance

    When servicing, use only identical Harbor Freight Tools replacement parts. Use of any other parts may create a hazard or cause product damage.
  • Page 16: Troubleshooting

    TROUBLESHOOTING Problem Possible Cause Solution Compressor will not run Loss of power or overheating Check for proper use of extension cord No electrical power Check to be sure unit is plugged in Check fuse/breaker or motor over- load Blown shop/house fuse Replace shop/house blown fuse Shop/house breaker open Reset shop/house breaker, determin-...
  • Page 17 NOTES...
  • Page 18 NOTES...
  • Page 19 NOTES...
  • Page 20: Warranty

    (90 days if used by a professional contractor or if used as rental equipment). Harbor Freight Tools also warrants to the original purchaser, for a period of ninety days from date of purchase, that all other parts and components of the product are free from defects in materials and workmanship.

This manual is also suitable for:

6814968149

Table of Contents