Connections; Battery Installation/Replacement - Panasonic KX-TG9120FX Operating Instructions Manual

TG9120FX(e).book Page 12 Tuesday, August 29, 2006 9:44 AM
Preparation
Soft Action
key
icon
Switches to Voicemail history
u
for internet calls.
Rejects the 2nd call.
E
Places the internet call on
H
hold.

Connections

When connecting the AC adaptor to the
base unit, a short beep will be heard. If it is
not heard, check the connections.
Hook
(220–240 V, 50 Hz)
To telephone network
Use only the included AC adaptor
and telephone line cord.
Note:
L Never install telephone wiring during a
lightning storm.
L The AC adaptor must remain connected
at all times. (It is normal for the adaptor to
feel warm during use.)
L The AC adaptor should be connected to a
vertically oriented or floor-mounted AC
outlet. Do not connect the AC adaptor to a
ceiling-mounted AC outlet, as the weight
of the adaptor may cause it to become
disconnected.
12
Location
L For maximum distance and noise-free
operation, place your base unit:
– away from electrical appliances such as
TVs, radios, personal computers or
other phones.
– in a convenient, high and central
location.
Battery
installation/replacement
Important:
L Use only the included rechargeable
batteries noted on page 6, 7.
L When replacing batteries, we recommend
using the Panasonic rechargeable
batteries noted on page 6, 7.
L Wipe the battery ends (S, T) with a dry
cloth.
L When installing the batteries, avoid
touching the battery ends (S, T) or the
unit contacts.
1
Press the notch on the handset cover
firmly and slide it in the direction of the
arrow.
L When replacing batteries, remove the
old batteries positive (S) end first.
2
Insert the batteries negative (T) end
first. Close the handset cover.