Remote Control Preparations - Panasonic DVD-RV60 Operating Instructions Manual

Terms used in these operating instructions
Title/Chapter [DVD]
DVDs are divided up into large sections, titles, and smaller sections,
chapters. The numbers allocated to these sections are called title
numbers and chapter numbers.
Example:
Title 1
Chapter 1 Chapter 2 Chapter 3 Chapter 1 Chapter 2
[VCD] [CD]
Track
Video CDs and CDs are divided up into sections called tracks, and
the numbers allocated to these sections are called track numbers.
Example:
Track 1 Track 2 Track 3 Track 4 Track 5
[VCD]
Playback control
If a Video CD has "playback control" written on its disc or jacket, it
means that particular scenes or information can be selected for
viewing interactively with the TV monitor using the menu screen.
This player can play Video CDs with playback control.
Using menus to control play of a Video CD is called "menu play" in
these operating instructions.
Display during menu play of a Video CD with playback control
Interactive DVD [DVD]
An interactive DVD is DVD software which includes multiple angles,
multiple plot endings, etc. The elapsed play time of some of these
DVDs is not shown.
Display during play of an interactive DVD
DVD
Title 2

Remote control preparations

Battery installation
Use of batteries
Align the poles ( and ) properly when inserting the batteries.
Do not mix old and new batteries or different types of batteries.
Do not recharge ordinary dry cell batteries.
Do not heat or disassemble the batteries. Do not allow them to con-
tact flame or water.
Remove the batteries if the unit is not to be used for a long time.
Do not keep together with metallic objects such as necklaces.
Do not use rechargeable type batteries.
Do not use batteries if the covering has been peeled off.
Mishandling of batteries can cause electrolyte leakage which can
damage items the fluid contacts and may cause a fire.
If electrolyte leaks from the batteries, consult your dealer.
Wash thoroughly with water if electrolyte comes in contact with any
part of your body.
Correct method of use
Operation notes
Remote control signal sensor
30° 30°
Transmission
window
Do not place obstacles between the remote control signal sensor
and remote control unit.
Do not expose the remote control signal sensor to direct sunlight or
to the bright light of a fluorescent light.
Take care to keep the remote control signal sensor and end of the
remote control unit free from dust.
If this system is installed in a rack with glass doors, the glass doors'
thickness or colour might make it necessary to use the remote con-
trol a shorter distance from the system.
To prevent damage
Never place heavy items on top of the unit.
Do not disassemble or reconstruct the unit.
Do not spill water or other liquids into the unit.
R 6 / L R 6 ,
AA, UM-3
About 7 meters
in front of the
signal sensor
7
VQT8626