Changing Initial Settings; Common Procedures - Panasonic DVD-RV60 Operating Instructions Manual

H
STOP PAUSE
∫ ;
SKIP
: 9
TOP MENU
2·3
ENTER
DISPLAY
PLAY MODE SUBTITLE AUDIO ANGLE
REPEAT MODE
1
A-B REPEAT
4
V.S.S.
7
SETUP CANCEL
1
1
SETUP
2
ENTER
3
ENTER
OPEN/CLOSE
<
PLAY
1
SLOW / SEARCH
6 5
MENU
RETURN
RETURN
2 3
Numeric
5 6
buttons
8 9
0 10
S
1 Disc Languages
2 Ratings Level 8
3 Menu Language English
4 On-Screen Messages
5 FL Display Bright
6 TV Aspect 4:3
7 Digital Audio Output
8 Speaker Setting 2-channel
9 Other Settings
Press RETURN to exit

Changing initial settings

Change the initial settings to suit your preference and to suit the play-
er to the environment in which it is being used.

Common procedures

1
Press [SETUP] in the stop mode.
The initial settings screen is displayed.
2
Press the cursor buttons [3, 4] to se-
lect the item and press [ENTER].
Each item that can be modified is displayed.
1 Disc Languages ( page 28)
Change the soundtrack language, subtitle language and
the language used in the disc's menu to be used for every
disc played back.
2 Ratings ( page 29)
Change the ratings level to prevent play of discs, skip vio-
lent scenes, or replace scenes with others by entering a
password. This is also called a parental lock.
3 Menu Language ( page 30)
Change the language used for the on-screen displays and
initial settings menus.
4 On-Screen Messages (
Choose whether "Play", "Still" and other displays will be
displayed or not, and the colour and position of these dis-
plays as well as GUI screens.
5 FL Display ( page 30)
Change the brightness for the FL display.
6 TV Aspect ( page 11)
Change the settings to suit the type of television you have
connected.
7 Digital Audio Output (
Change the settings to suit the type of digital equipment
you have connected.
8 Speaker Setting ( page 39)
Change the settings to suit the speakers you have con-
nected.
9 Other Settings ( page 31)
Choose the kind of picture shown when play is paused,
and various other settings to enhance your viewing experi-
ence.
3
Press the cursor buttons [3, 4] to se-
lect the setting and press [ENTER].
≥Some items require additional steps. (See the respective
page.)
Setting is finished and the initial settings screen is displayed.
To cancel during setup operation
Press [RETURN]. (The previous screen is displayed.)
To exit the initial settings screen
Press [SETUP] or [RETURN].
For your reference
≥The numeric buttons can also be used instead of the cursor buttons
[3, 4] for selecting items or settings. Pressing [ENTER] is not
necessary.
page 30)
page 37)
27
VQT8626