Quick Start - Panasonic TX-21AT1F Operating Instructions Manual

QUICK START

Check you have all the
components shown here:
remote control
unit batteries
2 x R6 (UM3)
AV cover
TKP0E10401
EUR511310
remote control
unit
operation
manual
Remote control unit batteries
S Insert the batteries ensuring
correct polarity.
S Do not use old and new
batteries at the same time.
Used batteries should be
removed at once.
S Do not mix battery types. Do
not use Ni---Cd and Ni---MH
batteries.
1
OR
Connect the aerial and the additional devices.
Switch on the unit and the connected devices.
3
Select your language.
Press TV/AV button.
Select your country.
Press TV/AV button.
Automatic tuning will turn on. Your
broadcasting stations will be searched,
saved and optionally sorted inside the
TV memory.
Press button "F" if you want to stop;
press button "N" if you want to
cancel the ATP sequence.
If the AV connector is connected to a
compatible VCR the programmed data
will be transmitted to the VCR via
Q---Link. See page 12.
4
Channel selection
If the VCR has failed to receive the data transmitted from the television
D
unit you will probably have to find a way to transmit the data from the VCR
menu.
If Q---Link does not work properly, check if the SCART cable is
D
connected to AV1 connector on the unit and has all the 21 pins, and if the
VCR is compatible with Q---Link, NEXTVIEWLINK and similar techniques.
You will find Information regarding Q---Link and connection on pages
D
12 and 16. Should you need more detailed information, contact your
dealer.
If you install a new Q---Link compatible VCR, you may switch it on. The
transmitted tuning data will match the data in the unit. If you use a new
NEXTVIEWLINK---compatible VCR, the data will have to be transmitted
manually. See details in the VCR operating manual.
How To Start Up Quickly
2
SCART
Volume adjustment
3