Page 1
Copyright 2003 by Harbor Freight Tools manual or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools. For technical questions and replacement parts, please call 1-800-444-3353 90385 ®...
Keep bystanders, children, animals and visitors away while operating a power tool. Distractions can cause you to lose control. Protect others in the work area from debris such as chips and sparks. Provide barriers or shields as needed. SKU 90385 For technical questions, please call 1-800-444-3353. SPECIFICATIONS Description 120 VAC, 60 Hz 2.5 HP (rated), 3400 RPM;...
Do not overreach. Keep proper footing and balance at all times. Proper footing and balance enables better control of the power tool in unexpected situations. SKU 90385 For technical questions, please call 1-800-444-3353. Electrical Safety eliminates the need for the three wire grounded power...
Page 4
“Inspection, Maintenance, And Cleaning” section of this manual. Use of unauthorized parts or failure to follow maintenance instructions may create a risk of electric shock or injury. SKU 90385 For technical questions, please call 1-800-444-3353. Tool Use and Care...
Page 5
SPECIFIC SAFETY RULES FOR THIS PRODUCT Maintain labels and nameplates on the Air Compressor. These carry important information. If unreadable or missing, contact Harbor Freight Tools for a replacement. Maintain a safe working environment. Keep the work area well lit. Make sure there is adequate surrounding workspace.
Association, and the National Electrical Code. (See Figure B on page 6.) Double insulated tools may be used in either of the 120 volt outlets shown in the preceding illustration. (See Figure B on page 6.) SKU 90385 For technical questions, please call 1-800-444-3353. GROUNDING...
Page 7
When unpacking, check to make sure that all the parts are included. Refer to the Assembly section, and the Assembly Drawing and Parts List at the end of this manual. If any parts are missing or broken, please call Harbor Freight Tools at the number on the cover of this manual as soon as possible.
ASSEMBLY INSTRUCTIONS Warning: Fill compressor with oil before using; running without oil, or with low oil voids warranty. Do not plug in the Air Compressor until you are ready to use it, as set forth below. Unscrew (do not pull) the Oil Plug (79). (See Figure C.) Check the level of the oil by viewing the Oil Leveler (72) window (below the Oil Plug).
Pull up on the Auto/Off Pressure Switch (66) to turn on. Push down on the Switch to shut off. Allow the Tank to fill to 80 PSI before using. With the Air Compressor turned on, operation is automatic and under the control of the internal pressure switch. Auto / Off Switch...
Unscrew the water Spill Valve (59) two to three turns. INSPECTION, MAINTENANCE, AND CLEANING WARNING! Make sure the Power Switch of the Air Compressor is in its “OFF” position and that the tool is unplugged from its electrical outlet before performing any inspection, maintenance, or cleaning procedures.
CENTRIFUGAL SWITCH SEAT CENTRIFUGAL SWITCH BODY BOLT NOTE: Some parts are listed and shown for illustration purposes only and are not available individually as replacement parts. SKU 90385 For technical questions, please call 1-800-444-3353. PARTS LIST Qty. Part # Description...