(Viera Image Viewer) Displaying Pc Screen On Tv - Panasonic Viera TX-P42G10B Operating Instructions Manual

Displaying PC Screen on TV
The screen of the PC connected to the TV can be displayed on the TV.
You can also listen to PC sound with the audio cable connected.
●
To connect PC p. 66
INPUT
TV AV
ASPECT MENU N DIRECT TV REC
EXIT
BACK/
OPTION
RETURN
TEXT STTL INDEX HOLD
■
To return to TV
TV
■
PC menu setting (changed as desired)
●
To make settings "How to Use Menu Functions"
Menu Item
W/B High R
W/B High B
Advanced
W/B Low R
PC
W/B Low B
Settings
Gamma
Reset to
Defaults
Input
Resolution
Clock
H-pos
PC
Setup
V-pos
Clock Phase
Sync
Reset to
Defaults
●
Other items p. 30 - 33
Note
●
For HDMI-compatible PC, possible to connect to HDMI terminals (HDMI1 / HDMI2 / HDMI3) by using HDMI cable
(p. 70).
1
Select the external input
AV
2
Select "PC"
Input Selection
AV1
AV2/S
AV3/S
COMPONENT
PC
HDMI1
HDMI2
HDMI3
TV
Adjustments / Configurations (options)
White balance of bright red area
White balance of bright blue area
White balance of dark red area
White balance of dark blue area
Switches the gamma curve (S Curve / 2.0 / 2.2 / 2.5)
Press the OK button to reset to the default Advanced PC Settings
Switches to a wide view
●
VGA (640 × 480 pixels), WVGA (852 × 480 pixels),
XGA (1,024 × 768 pixels), WXGA (1,280 × 768 pixels, 1,366 × 768 pixels)
●
Options change depending on signals
Set to the minimum level if noise occurs
Adjusts horizontal position
Adjusts vertical position
Eliminates flicker and distortion
●
Adjust after Clock adjustment
Chooses another synchronous signal if the image is distorted (H & V / On Green)
●
H & V : by the horizontal and vertical signals from your PC
On Green : by the green signal from your PC (if available)
Press the OK button to reset to the default PC Setup settings
●
Corresponding signals
●
If "H-freq." or "V-freq." is shown in red,
the signals may not be supported.
to (p. 26)
●
Set to the minimum level if noise occurs
access
select
p. 72
and
repeatedly adjusted
57