Communication Camera
•
TY-CC10W
Caution
•
This camera can be used on VIERA Connect (p. 16, 69).
•
Please also read the manual of the camera.
•
Depending on the area, this optional accessory may not be available.
For details, consult your local Panasonic dealer.
Attaching / removing the pedestal
To help avoid risk of damage or injury by the TV tipping or falling, please follow the warnings and
cautions below:
Warning
•
Do not disassemble or modify the pedestal.
Caution
•
Do not use any pedestal other than the one provided with this TV.
•
Do not use the pedestal if it becomes warped or physically damaged. If this occurs, contact your
nearest Panasonic dealer immediately.
•
During setup, make sure that all screws are securely tightened.
•
Ensure that the TV does not suffer any impact during installation of the pedestal.
•
Ensure that children do not climb onto the pedestal.
•
Install or remove the TV from the pedestal with at least two people.
A
Assembly screw (4)
(silver)
•
XYN5+F20FN
M5 × 20
1
Assembling the pedestal
Use the assembly screws
fasten the pole
to the base
C
securely.
•
Make sure that the screws are
securely tightened.
•
Forcing the assembly screws the
wrong way will strip the threads.
A
C
D
Removing the pedestal from the TV
Be sure to remove the pedestal in the following way when using the wall-hanging bracket or
repacking the TV.
1 Remove the assembly screws
2 Pull out the pedestal from the TV.
3 Remove the assembly screws
B
Assembly screw (4)
(black)
•
THEL088N
M5 × 25
to
A
D
Front
from the TV.
B
from the pole.
A
C
Pole
•
TBL5ZA3028
2
Securing the TV
Use the assembly screws
•
Tighten the four assembly screws loosely at first,
then tighten them firmly to fix securely.
•
Carry out the work on a horizontal and level surface.
B
Hole for
pedestal
installation
(View from the bottom)
D
Base
•
TBL5ZX0030
to fasten securely.
B
Arrow mark
D
7