Panasonic Viera TX-P42S30B Operating Instructions Manual page 11

Example 3
Connecting DVD Recorder / VCR and Satellite receiver
TV, DVD Recorder / VCR and Satellite
Rear of the TV
AC 220-240 V
50 / 60 Hz
Mains lead
(supplied)
■
Connecting to the network environment (Network connections)
To enable the network service functions (VIERA Connect, etc.), you need to connect the TV to a
broadband network environment.
•
If you do not have any broadband network services, please consult your retailer for assistance.
•
Connect with LAN cable (Wired connection) or Wireless LAN Adaptor (Wireless connection).
•
Setup of the network connection will start after the tuning (when first using the TV)
Rear of the TV
Wired connection
LAN cable
Less
than
10 cm
Note
•
For more information of the network connections
Aerial input terminal
Fully wired HDMI
compliant cable
HDMI Recorder/AV
Satellite receiver
Wireless connection
Wireless LAN Adaptor and Extension cable
"Optional accessories" (p. 6)
•
Connect to the USB 1 or 2 port.
Less
than
10 cm
Internet
environment
Fully wired
SCART
cable
Fully wired
SCART cable
AV 2
DVD Recorder
or VCR
RF OUT
RF cable
RF IN
Ferrite core (supplied)
Installing the Ferrite core
Pull back the tabs Wind the
(in two places) cable twice
(p. 63)
Terrestrial
RF cable
Fully wired
HDMI
compliant
cable
AV 1 HDMI
RF OUT
RF IN
RF cable
(p. 12 - 14)
Internet
environment
Access point
Press the cable
through and close
aerial
11