To enjoy High Bit rate Audio and Video
Enjoying High Bit rate Audio with 7.1ch speaker
This unit can decode high bit rate audio (Dolby Digital Plus, Dolby TrueHD, DTS-HD High Resolution Audio and DTS-HD Master Audio) adopted
in BD-Video.
To enjoy 7.1ch surround sound, the following conditions are necessary (Part shown in the shaded area of table given below).
≥Connect an amplifier/receiver with 7.1ch speaker supporting HDMI(High Bit rate Audio) using a High Speed HDMI cable. (
≥Set "BD-Video Secondary Audio" to "Off". (
≥Set "Dolby D/Dolby D +/Dolby TrueHD" or "DTS/DTS-HD" to "Bitstream" or "PCM". (
About audio from audio output terminal
Connect an amplifier/receiver and confirm the desired audio type and necessary settings ("BD-Video Secondary Audio", "Dolby D/Dolby D +/
Dolby TrueHD" or "DTS/DTS-HD").
≥The number of channels listed is the maximum possible number of output channels.
≥Also, depending on the specifications or the settings of the amplifier/receiver, the results of the output may vary.
Terminal
"Dolby D/Dolby D +/Dolby
TrueHD"/
"DTS/DTS-HD"
"BD-Video Secondary
Audio"
Dolby Digital/
5
Dolby Digital EX*
Dolby Digital EX*
Dolby Digital Plus
Dolby TrueHD
DTS Digital Surround/
DTS-ES*
5
DTS-HD High Resolution
Audio
DTS-HD Master Audio
7.1ch LPCM
When the connected equipment is not supported with these audio format, the audio is output as Dolby Digital bitstream, DTS Digital Surround
*
1
bitstream or down-mixed 2ch PCM (e.g., TV)
[BD-V]: When playing BD-Video without secondary audio or clicking sound, the audio is output as the same format as if "BD-Video Secondary
*
2
Audio" was set to "Off".(
89)
When the connected equipment is not supported with multi channel surround, the audio is output as down-mixed 2ch PCM.
*
3
[BD-V]: When the connected equipment is supported with 7.1 channel surround, the audio output is amplified from 5.1ch or 6.1ch to 7.1ch
*
4
depending on the DTS, Inc. specifications.
With PCM output, Dolby Digital EX becomes PCM audio decoded as Dolby Digital, DTS-ES recorded to DVD-Video becomes PCM audio
5
*
decoded as DTS Digital Surround, and DTS-ES recorded to BD-Video becomes PCM audio decoded as DTS-ES.
*
[BD-V]: When "BD-Video Secondary Audio" is set to "On", Dolby Digital EX is output as Dolby Digital and DTS-ES is output as DTS Digital
6
Surround, however if playing BD-Video without secondary audio or clicking sound, the audio is output as the original format.
[Note]
≥When setting "BD-Video Secondary Audio" to "Off", the clicking sound on the menu and audio with secondary video in picture-in-picture mode
(
44) cannot be output.
Regarding 24p output
Many BD-Video movie contents are recorded in 24 frames/second in accordance with the film materials. However, they will normally be output in
60 frames/second in accordance with the display format.
These can be output in 24p as the original. Therefore, high-quality video can be enjoyed, such as the improved clarity, enhanced perspective, etc.
Preparation
≥Connect to a TV supporting 1080/24p input via an HDMI cable.
≥Set "BD-Video 24p Output" to "On". (
.
89)
HDMI AV OUT
"Bitstream"*
1
2
"On"*
"Off"
Dolby Digital/
Dolby Digital/
6
Dolby Digital EX
Dolby Digital Plus
Dolby Digital
Dolby TrueHD
DTS Digital
DTS Digital
Surround/
Surround/
DTS-ES*
6
DTS-ES
DTS-HD High
Resolution Audio
DTS Digital
Surround
DTS-HD Master
Audio
Down-mixed
7.1ch PCM
5.1ch PCM
90)
88)
"PCM"*
3
"On"
"Off"
5.1ch PCM
2
7.1ch PCM
5.1ch PCM*
[DVD-V] 5.1ch PCM
[BD-V] 7.1ch PCM*
4
4
7.1ch PCM*
Down-mixed
7.1ch PCM
2
5.1ch PCM*
97)
DIGITAL AUDIO OUT
"Bitstream"
"PCM"
"On"/"Off"
"On"/"Off"
Dolby Digital/
Dolby Digital EX*
6
Dolby Digital
DTS Digital
Surround
Down-mixed 2ch
DTS-ES*
6
PCM
DTS Digital
Surround
Down-mixed 2ch
PCM
RQT9132
45