Enjoying High Bit Rate Audio And Video - Panasonic DMP-B100 Operating Instructions Manual

Enjoying High Bit rate Audio and Video

R eference
About audio output
The audio output differs depending on the settings on the unit. (
≥ The number of channels listed is the maximum possible number of output channels.
"Dolby D/Dolby D +/Dolby TrueHD"/
"DTS/DTS-HD"
"BD-Video Secondary Audio"
Dolby Digital/
Dolby Digital EX
Dolby Digital Plus/
Dolby TrueHD
DTS Digital Surround/
DTS-ES
DTS-HD High Resolution Audio/
DTS-HD Master Audio
7.1ch LPCM
*1
When the connected equipment is not supported with these audio formats, the audio is output as Dolby Digital bitstream, DTS
Digital Surround bitstream or down-mixed 2ch PCM (e.g., TV).
*2
When the connected equipment is not supported with multi channel surround, the audio is output as down-mixed 2ch PCM.
*3 When playing BD-Video without secondary audio or button click sound, the audio is output as the same format as if "BD-Video
Secondary Audio" was set to "Off".
Enjoying High Bit rate Audio of BD-Video
[BD-V]
This unit supports high bit rate audio (Dolby Digital Plus, Dolby TrueHD, DTS-HD High Resolution Audio and DTS-HD Master
Audio) adopted in BD-Video.
In order to enjoy these audio formats, the following conditions are necessary. (Part shown in the shaded area of table given above)
NECESSARY CONNECTIONS
≥ HDMI AV OUT terminal: (
NECESSARY SETTINGS
≥ Set "BD-Video Secondary Audio" to "Off". (
≥ Set "HDMI Audio Output" to "On". (
≥ HDMI AV OUT terminal: Set "Dolby D/Dolby D +/Dolby TrueHD" or "DTS/DTS-HD" to "Bitstream" or "PCM". (
≥ The button click sound on the menu and audio with secondary video in picture-in-picture mode (
34
VQT2H73
"On"
Dolby Digital
DTS Digital
Surround
25)
31)
33)
31, "Digital Audio Output")
"Bitstream" *1
*3 "Off"
Outputs using
original audio
5.1ch PCM
"PCM" *2
"On" "Off"
5.1ch PCM
31)
19) is not output.