Fan Power Connector: Cpufan1 - MSI MD 5000 User Manual

MD-5000 M-ATX Mainboard

Fan Power Connector: CPUFAN1

The CPUFAN1 (processor fan) supports system cooling fan with +12V.
It supports a three-pin head connector. When connecting the wire to the
connector, always take note that the red wire is the positive and should be
connected to the +12V, the black wire is Ground and should be connected to
GND. If the mainboard has a System Hardware Monitor chipset on-board,
you must use a specially designed fan with speed sensor to take advantage of
the CPU fan control.
MSI Reminds You...
1. Always consult the vendors for proper CPU cooling fan.
2. CPUFAN supports the fan control. You can install the PC
Alert utility that will automatically control the CPU fan speed
according to the actual CPU temperature.
2-18
GND
+12V
SENSOR
CPUFAN1