Table of Contents
Advertisement
Use the alarm
At the set alarm time, music/Internet radio
plays as desired, or the buzzer sounds.
Note
•
The alarm sounds even if you have switched
NP3900 to active standby or Eco standby.
•
The buzzer sounds instead, if NP3900 fails to
connect to a music library or an Internet radio
station.
•
NP3900 is unmuted if it has been muted.
•
The alarm sounds in a higher volume if the
volume level is lower than minimum.
To snooze the alarm
•
Press any button on the unit or the
remote control (except for the volume
buttons).
»
The alarm sounds again 15 minutes
later. The alarm icon remains.
To stop the alarm
•
Press and hold
•
Or press
remote control.
»
The alarm is stopped.
»
The alarm sounds again next day.
To turn off the alarm
•
Go to
[Settings] > [Clock settings] >
[Alarm]. Select [Alarm off] and press OK
on the remote control.
Sleep timer
With the sleep timer, you can have NP3900
turned off automatically after the set timer
duration.
To set the time duration
1
From the home screen, go to [Settings] >
[Clock settings] > [Sleep timer].
•
Or, press
SETTINGS on the remote
control to enter [Settings].
or .
/ALARM OFF on the
2
Select an option. Press OK to turn it on.
Tip
•
You can also press
control repeatedly to set the time duration.
Date and time
The date and time can be set automatically or
manually.
Tip
•
To view the set clock, press
emote control.
Automatic setting
For automatic clock setting, use the online
service over the Internet.
Through the online service over the Internet
1
Turn on the unit, if necessary.
•
Ensure that the unit is connected to
the home Wi-Fi/wired network and
Internet.
2
From Home screen, select [Settings] >
[Clock settings] > [Date and time].
•
Or, press
SETTINGS on the remote
control to enter [Settings].
3
In [Date and time], select [Current date
and time] > [Automatic (Internet)].
»
The unit starts auto time setting over
the Internet.
»
A message appears when the setting
is done.
SLEEP on the remote
CLOCK on the
EN
39
Advertisement
Table of Contents
