Table of Contents
Advertisement
•
Press
/
repeatedly to select the entry
location;
•
To enter the desired digits, use the
alphanumeric buttons on the remote
control; or press
Note
•
Ensure that you never enter an IP address that
is already assigned to a computer/device on
the network.
Wired connection
Connect to the router by using the Ethernet
cable
1
Select [Yes], when asked whether to set
up network connection (see 'First-time
setup').
2
Use an Ethernet cable to connect the unit
to the router.
/
repeatedly.
NP3900
Connect to the home Wi-Fi/wired network
•
On the unit, select
»
The unit starts to acquire an IP address
assigned by the network automatically.
»
A message appears when the
connection is completed successfully.
Wireless (W
Wired (Ethernet)
Tip
•
The router may fail to assign an IP address,
if the DHCP (Dynamic Host Configuration
Protocol) is unavailable or disabled on the
router. You may need to enter the IP address
manually, or press BACK to start re-
connecting.
12V=1A
To Modem
LAN4
LAN3
LAN2
[Wired (Ethernet)].
2/2
i
i
F
)
EN
LAN1
Reset
21
Advertisement
Table of Contents
