BIOS Setup
BIOS Setup
▶
OC Dal Step
Ths tem s used to set value of each step when you rotate the OC dal knob.
▶
OC Dal Reset
Select [Reset] f you need to reset the OC Dal Value.
▶
OC Dal Value
Ths tem ndcates the overclockng value by OC dal functon. When you rotate the OC
dal knob, ths value wll change.
▶
OC Dal Adjusted FSB Clock (MHz)
It shows the adjusted FSB clock by OC Dal functon (FSB Clock +OC Dal Value).
Read-only.
▶
MEMORY-Z
Press <Enter> to enter the sub-menu.
▶
DIMM1~4 Memory SPD Informaton
Press <Enter> to enter the sub-menu. The sub-menu dsplays the nformaton of
nstalled memory.
▶
Advance DRAM Configuraton
Press <Enter> to enter the sub-menu and the followng screen appears.
▶
DRAM Tmng Mode
Ths field has the capacty to automatcally detect all of the DRAM tmng.
▶
1T/2T Memory Tmng
Ths tem controls the SDRAM command rate. Select [1T] makes SDRAM sgnal
controller to run at 1T (T=clock cycles) rate. Selectng [2T] makes SDRAM sgnal
controller run at 2T rate.
▶
DCT Unganged Mode
Ths feature s used to Integrate two 64-bt DCTs nto a 128-bt nterface.
▶
Bank Interleavng
Bank Interleavng s an mportant parameter for mprovng overclockng capablty of
memory. It allows system to access multple banks smultaneously.
3-22