Fan Power Connectors: CPUFAN, SYSFAN1~4
The fan power connectors support system coolng fan wth +12V. When connectng the
wre to the connectors, always note that the red wre s the postve and should be con-
nected to the +12V; the black wre s Ground and should be connected to GND. If the
manboard has a System Hardware Montor chpset on-board, you must use a specally
desgned fan wth speed sensor to take advantage of the CPU fan control.
CPUFAN
Important
Please refer to the recommended CPU fans at processor's offical webste or consult
•
the vendors for proper CPU coolng fan.
•
CPUFAN supports fan control. You can nstall Control Center utlty that wll automat-
cally control the CPU fan speed accordng to the actual CPU temperature.
•
Fan cooler set wth 3 or 4 pns power connector are both avalable for CPUFAN.
Front Panel Audo Connector: JAUD1
Ths connector allows you to connect the front panel audo and s complant wth Intel
Front Panel I/O Connectvty Desgn Gude.
SYSFAN1~4
MS-7640
MS-7640
®
2-13