MSI 890FXA-GD70 series User Manual page 57

▶ EuP 2013
Ths Item s Desgned for Energy Usng Products Lot 6 2013 (EuP) aka Energy Related
Products (ErP). To Reduce Power Consumpton when System off or Standby Mode.
Note: When "Enabled" EuP 2013 Settng, System Don't Support RTC Wake Up Event
functon.
▶ Restore On AC Power Loss
Ths tem specfies whether your system wll reboot after a power falure or nterrupt
occurs. Settngs are:
[Off] Always leaves the computer n the power off state.
[On] Always leaves the computer n the power on state.
[Last State] Restore the system to the status before power falure or nterrupt
occurred.
▶ Wake Up Event Setup
Press <Enter> to enter the sub-menu and the followng screen appears:
▶ Wake up Event By
Settng to [BIOS] actvates the followng fields, and use the followng fields to set the
wake up events. Settng to [OS], the wake up events wll be defined by OS.
▶ Resume S3 By USB Devce
The tem allows the actvty of the USB devce to wake up the system from S3 (Sus-
pend to RAM) sleep state.
▶ Resume S3/S5 By PS/2 Keyboa / Mouse
These tems determne whether the system wll be awakened from what power sav-
ng modes when nput sgnal of the PS/2 keyboard/ mouse s detected.
▶ Resume By PCI or PCI-E Devce
When set to [Enabled], the feature allows your system to be awakened from the
power savng modes through any event on PCIE or PCI devce.
▶ Resume By RTC Alarm
The field s used to enable or dsable the feature of bootng up the system on a
scheduled tme/date.
MS-7640 MS-7640
3-13