Connect To The Internet - Philips HTS7140 User Manual

Option 2: Connect audio through coaxial
cable
Note
• The digital coaxial cable or connector might be
labeled COAXIAL/DIGITAL OUT or SPDIF
OUT .
(Cable not supplied)
Option 3: Connect audio through a digital
optical cable
Note
•
The digital optical cable or connector might be
labeled as SPDIF OUT or OPTICAL OUT .
(Cable not supplied)

Connect to the Internet

Connect the home theater to a computer
network and enjoy:
Software update
• You can update the software of the home
theater through the network (see 'Update
software from the network' on page 19 ) .
What you need:
• A network router (with DHCP enabled).
• A network cable (RJ45 straight cable).
10 EN
•
(Cable not supplied)
LAN
TV
Set up network
1
2
3
4
5
TV
6
7
8
9
For software update, make sure that the
network router has access to the Internet
and is not restricted by À rewalls or other
security systems.
Connect the home theater to a broadband
modem or router (see 'Connect to the
Internet' on page 10) .
Turn on your TV and switch to the correct
source for the home theater.
Press ( Home ).
Select [Setup] , then press OK .
Select [Network Setup] > [Network
Installation] , then press OK .
Select [Wired (Ethernet)] , then press OK .
Select [Auto Setup] or [Manual Setup] ,
then press OK .
Follow the instructions on the TV to
complete the setup.
»
The home theater connects to the
internet. If connection fails, select [Retry] ,
then press OK .
Select [Finish] , then press OK to exit.
www