Inserting The Batteries In The Remote Control; Operating Range Of The Remote Control - Philips BDL4675XU User Manual

User Manual BDL4675XU
2.3.2.

INSERTING THE BATTERIES IN THE REMOTE CONTROL

1. Remove the cover on the rear of the remote control.
2. Insert two AAA size 1.5V batteries ensuring that the "+" and "-" ends of the
batteries are correctly aligned.
3. Replace the cover.
Note: Do not mix battery types, e.g. alkaline and manganese.
2.3.3.

OPERATING RANGE OF THE REMOTE CONTROL

When pressing a remote control button, point the top of the remote control toward
the remote control sensor from the rear side of the monitor.
Use the remote control within a distance of about 5m/16ft from the monitor's remote
control sensor and within a horizontal and vertical angle of 45 degrees.
Note: The remote control may not function properly if the remote control sensor on the monitor
is under direct sunlight or strong illumination, or if there is an obstacle in the path of signal
transmission.
RETURN TO THE CONTENTS